[Q61-Q79] Latest Cisco 300-430 First Attempt, Exam real Dumps Updated [Mar-2022]

Share

Latest Cisco 300-430 First Attempt, Exam real Dumps Updated [Mar-2022]

Get the superior quality 300-430 Dumps Questions from DumpsValid. Nobody can stop you from getting to your dreams now. Your bright future is just a click away!

NEW QUESTION 61
What is the default NMSP echo interval between Cisco MSE and a Wireless LAN Controller?

  • A. 30 seconds
  • B. 15 seconds
  • C. 10 seconds
  • D. 60 seconds

Answer: B

Explanation:

 

NEW QUESTION 62
During the EAP process and specifically related to the client authentication session, which encrypted key is sent from the RADIUS server to the access point?

  • A. session key
  • B. WPA key
  • C. encryption key
  • D. shared-secret key

Answer: A

Explanation:

 

NEW QUESTION 63
A corporation has a wireless network where all access points are configured in FlexConnect. The WLC has a Data WLAN and a VoWiFi WLAN implemented where centrally-switched is configured for the APs. Which QoS configuration must be implemented for the wireless packets to maintain the marking across the wired and wireless network?

  • A. Set QoS to Platinum
  • B. Allow WMM
  • C. Trust DSCP
  • D. Enable CAC

Answer: C

Explanation:

 

NEW QUESTION 64
Which AP model of the Cisco Aironet Active Sensor is used with Cisco DNA Center?

  • A. 1800s
  • B. 4800i
  • C. 3800s
  • D. 3600e

Answer: A

 

NEW QUESTION 65
After installing and configuring Cisco CMX, an administrator must change the NTP server on the Cisco CMX server. Which action accomplishes this task?

  • A. Log in to the Cisco CMX GUI as the administrator and type the IP address of the NTP server in System tab > Settings> TimeZone/NTP.
  • B. Manually edit /etc/ntp.conf using an XML editor before restarting the server by using service restart all services.
  • C. Log in to the Cisco CMX CLI and issue set ntp server NTP_IP where NTPJP is the IP of the NTP server.
  • D. Manually edit /etc/ntp.conf as the admin user before restarting ntpd by using service ntpd restart.

Answer: D

Explanation:
Explanation
https://www.cisco.com/c/en/us/support/docs/wireless/connected-mobile-experiences/200906-Troubleshootin

 

NEW QUESTION 66
A customer wants to Aps in the CEO's office to have different usernames and passwords for administrative support than the other APs deployed through the facility. Which feature must be enabled on the WLC and Aps to achieve this goal?

  • A. 802.1X supplicant credentials
  • B. Local management users
  • C. Override global credentials
  • D. HTTPS access

Answer: A

 

NEW QUESTION 67
What must be configured on ISE version 2.1 BYOD when using Single SSID?

  • A. 802.1x
  • B. no authentication
  • C. open authentication
  • D. WPA2

Answer: D

Explanation:

 

NEW QUESTION 68
Branch wireless users report that they can no longer access services from head office but can access services locally at the site. New wireless users can associate to the wireless while the WAN is down. Which three elements (Cisco FlexConnect state, operation mode, and authentication method) are seen in this scenario? (Choose three.)

  • A. authentication-central/switch-central
  • B. authentication-local/switch-local
  • C. WEB authentication
  • D. WPA2 personal
  • E. standalone mode
  • F. lightweight mode

Answer: B,D,E

 

NEW QUESTION 69
Refer to the exhibit.

An engineer needs to configure location services in an office. The requirement is to use FastLocate and achieve higher locations refresh rates. Which location-based technique should be implemented?

  • A. data packet-based
  • B. angulation
  • C. probe-based
  • D. location patterning

Answer: A

 

NEW QUESTION 70
What must be configured on the Global Configuration page of the WLC for an access point to use 802.1x to authenticate to the wired infrastructure?

  • A. TACACS server IP address.
  • B. local access point credentials
  • C. supplicant credentials
  • D. RADIUS shared secret

Answer: D

Explanation:

 

NEW QUESTION 71
A wireless engineer must configure access control on a WLC using a TACAS+ server for a company that is implementing centralized authentication on network devices. Which role must be configured under the shell profile on the TACAS+ server for a user with ready-only permissions?

  • A. ADMIN
  • B. MANAGEMENT
  • C. MONITOR
  • D. READ

Answer: C

 

NEW QUESTION 72
What is the difference between PIM sparse mode and PIM dense mode?

  • A. Sparse mode supports multiswitch networks. Dense mode supports only one switch.
  • B. Sparse mode uses distribution trees. Dense mode floods.
  • C. Sparse mode floods. Dense mode uses distribution trees.
  • D. Sparse mode supports only one switch. Dense mode supports multiswitch networks.

Answer: B

Explanation:
Explanation

https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipmulti_pim/configuration/xe-16/imc-pim-xe-16-book/imc-te In Sparse mode packets branches distribution growth as new nodes join the multicast group.
https://community.calix.com/s/article/Dense-Mode-Multicast-vs-Sparse-Mode-Multicast-1

 

NEW QUESTION 73
CMX Facebook Wi-Fi allows access to the network before authentication. Which two elements are available?
(Choose two.)

  • A. Allow SNMP traffic only before authentication and block all the traffic.
  • B. Allow HTTP traffic only before authentication and block all the traffic.
  • C. Allow all the traffic before authentication and intercept HTTPS only.
  • D. Allow all the traffic before authentication and intercept HTTP only.
  • E. Allow HTTPs traffic only before authentication and block all other traffic.

Answer: D,E

 

NEW QUESTION 74
What is configured to use more than one port on the OEAP to extend the wired network's?

  • A. remote LAN
  • B. remote LAN ACL
  • C. AAA override
  • D. client load balancing

Answer: A

Explanation:

 

NEW QUESTION 75
A wireless engineer must configure access control on a WLC using a TACAS+ server for a company that is implementing centralized authentication on network devices. Which role must be configured under the shell profile on the TACAS+ server for a user with ready-only permissions?

  • A. ADMIN
  • B. MANAGEMENT
  • C. READ
  • D. MONITOR

Answer: C

 

NEW QUESTION 76
An engineer has implemented advanced location services for a retail wireless deployment. The marketing department wants to collect user demographic information in exchange for guest WLAN access and to have a customized portal per location hosted by the provider. Which social connector must be tied into Cisco CMX to provide this service?

  • A. MySpace
  • B. Gmail
  • C. Google+
  • D. Facebook

Answer: D

 

NEW QUESTION 77
The IT manager is asking the wireless team to get a report for all guest user associations during the past two weeks. In which two formats can Cisco Prime save this report? (Choose two.)

  • A. plain text
  • B. PDF
  • C. XLS
  • D. CSV
  • E. DOC

Answer: B,D

 

NEW QUESTION 78
An engineer must implement a BYDD policy with these requirements:
* Onboarding unknown machines
* Easily scalable
* Low overhead on the wireless network Which method satisfies these requirements?

  • A. triple SSID
  • B. single SSID
  • C. open SSID
  • D. dual SSID

Answer: B

 

NEW QUESTION 79
......

Cisco Practice Test Engine with 300-430 Questions: https://drive.google.com/open?id=1gJFx1KVH3KKcwS4qnSxL-tlcbm3zDwk9

Guaranteed Success with Valid Cisco 300-430 Dumps: https://www.dumpsvalid.com/300-430-still-valid-exam.html