[Oct-2024] Get 100% Real 300-430 Exam Questions, Accurate & Verified DumpsValid Dumps in the Real Exam!
Pass Your CCNP Enterprise Exams Fast. All Top 300-430 Exam Questions Are Covered.
What Are the Career Opportunities Available?
After all the effort you put to pass the exam and get your certification, you deserve to be rewarded with a higher salary. The Cisco Certified Specialist – Enterprise Wireless Implementation certificate opens many opportunities, making you compatible for the roles like:
- Network designer
- Wireless network engineer
- Sales engineer
If you apply for the position of network designer, then you should know that according to Payscale.com, you can win around $80k on average per year. You can get a similar salary if you decide to work as a Wireless Network engineer which is approximately $81k. Still, in case one obtains the CCNP Enterprise certification, job opportunities expand, and even the average salary raises to $86k per annum.
NEW QUESTION # 97
Which feature on the Cisco Wireless LAN Controller must be present to support dynamic VLAN mapping?
- A. CCKM/OKC
- B. AAA override
- C. VLAN name override
- D. FlexConnect ACL
Answer: B
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-
4/configuration/guides/consolidated/b_cg74_CONSOLIDATED/b_cg74_CONSOLIDATED_chapt er_010010000.html
NEW QUESTION # 98
On a Cisco Catalyst 9800 Series Wireless Controller, an engineer wants to prevent a FlexConnect AP from allowing wireless clients to connect when its Ethernet connection is nonoperational. Which command set prevents this connection?
- A. config terminal
wireless flexconnect profile [profile name]
ethernet-fallback-enable
end - B. config terminal
wireless profile flex [profile name]
fallback-radio-shut
end - C. config terminal
wireless flexconnect profile [profile name]
fallback-radio-shut
end - D. config terminal
wireless profile flex [profile name]
ethernet-fallback-enable
end
Answer: B
NEW QUESTION # 99
Refer to the exhibit.
Which two items must be supported on the VoWLAN phones to take full advantage of this WLAN configuration? (Choose two.)
- A. 802.11e
- B. TSPEC
- C. SIFS
- D. WMM
- E. APSD
Answer: A,D
Explanation:
NEW QUESTION # 100
Refer to the exhibit An ACL is configured to restrict access for BYOD clients.
The ACL must redirect devices to the guest portal. To which two devices on the local network must the ACL allow access other than the DHCP server?
(Choose two.)
- A. WLCD
- B. DNS server
- C. SNMP server
- D. Cisco ISE
- E. RADIUS server
Answer: B,D
NEW QUESTION # 101
Refer to the exhibit.
An engineer has deployed the Cisco CMX solution to track and detect the number of users who visit the office each day. The CMX dashboard is not showing any dat a. Which action resolves this issue?
- A. Install an evaluation license to CMX server.
- B. Add the WLCs to CMX.
- C. Copy the exported Maps from CMX server to PI using SCP.
- D. Configure Single Sign-On authentication.
Answer: B
NEW QUESTION # 102
A network engineer observes a spike in controller CPU overhead and overall network utilization after multicast is enabled on a controller with 500 APs. Which feature connects the issue?
- A. unicast AP multicast mode
- B. controller IGMP snooping
- C. broadcast forwarding
- D. multicast AP multicast mode
Answer: A
NEW QUESTION # 103
Which two protocols are used to communicate between the Cisco MSE and the Cisco Prime Infrastructure network management software? (Choose two.)
- A. NMSP
- B. HTTPS
- C. SSH
- D. Telnet
- E. SOAP
Answer: B,E
Explanation:
NMSP is just used between MSE and WLC.
https://www.cisco.com/c/en/us/support/docs/wireless/5500-series-wireless-controllers/113344- cuwn-ppm.html#anc5
NEW QUESTION # 104
An engineer must implement a CPU ACL that blocks web management traffic to the controller, but they also must allow guests to r a h a Web Authentication Redirect page. To which IP address is guest client HTTPS traffic allowed for this to work?
- A. virtual interface IP
- B. Client int rface IP
- C. DNS server IP
- D. controller management
Answer: A
NEW QUESTION # 105
Which devices can be tracked with the Cisco Context Aware Services?
- A. wired and wireless devices
- B. Cisco certified wireless devices
- C. wireless devices
- D. wired devices
Answer: A
Explanation:
https://www.cisco.com/c/en/us/support/docs/wireless/context-aware-software/110836-cas-faq.html
NEW QUESTION # 106
An engineer wants to configure WebEx to adjust the precedence and override the QoS profile on the WLAN.
Which configuration is needed to complete this task?
- A. Create an AVC profile for WebEx
- B. Change the AVC application WebEx-app-sharing to mark
- C. Change the WLAN reserved bandwidth for WebEx
- D. Create an ACL for WebEx
Answer: A
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/7-5/AVC_dg7point5.html
NEW QUESTION # 107
An engineer must configure a Cisco WLC to support Cisco Aironet 600 Series OfficeExtend APs. Which two Layer 2 security options are supported in this environment? (Choose two.)
- A. CKIP
- B. Static WEP + 802.1X
- C. 802.1X
- D. Static WEP
- E. WPA+WPA2
Answer: D,E
Explanation:
NEW QUESTION # 108
Refer to the exhibit. An engineer implemented the CPU ACL on your Cisco 5520 Series Wireless LAN Controller, and the controller is no longer manageable via the network. What must be changes on this CPU ACL to enable it to manage the controller again?
- A. Line 1 must be set to a destination port of HTTP.
- B. Line 1 must be set to the inbound direction.
- C. Permit statements must be added to the top of the ACL in both directions, which specify the network to be managed from and the virtual interface of the controller.
- D. Permit statements must be added to the top of the ACL, which specify the network to be managed from.
Answer: D
Explanation:
You manage the WLC using the management IP.
NEW QUESTION # 109
An engineer must track guest traffic flow using the WLAN infrastructure. Which Cisco CMX feature must be configured and used to accomplish this tracking?
- A. detect and locate.
- B. connect and engage
- C. presence
- D. analytics
Answer: C
Explanation:
The Cisco CMX Presence Analytics service is a comprehensive analytics and engagement platform that uses APs to detect visitor presence based on their mobile devices' Received Signal Strength Indication (RSSI). The AP detects these client mobile devices irrespective of the latter's wireless association state as long as they are within the specified signal range, and the wireless option is enabled on the mobile device (ability to detect devices wirelessly even if they are not connected to the network https://www.cisco.com/c/en/us/td/docs/wireless/mse/10-4/cmx_config/b_cg_cmx104/the_cisco_cmx_presence_analytics_service.html
NEW QUESTION # 110
An engineer has implemented 802.1x authentication on the wireless network utilizing the internal database of a RADIUS server. Some clients reported that they are unable to connect. After troubleshooting, it is found that PEAP authentication is failing. A debug showed the server is sending an Access-Reject message. Which action must be taken to resolve authentication?
- A. Disable the server certificate to be validated on the client.
- B. Use the user password that is configured on the server.
- C. Update the client certificate to match the user account.
- D. Replace the client certificates from the CA with the server certificate.
Answer: A
Explanation:
https://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ise10_troubleshooting.html
NEW QUESTION # 111
You plan to implement Cisco Identity Based Networking Services on a Cisco Catalyst 3850 Series Switch. Which switch command is required when configuring downloadable ACLs?
- A. aaa session-id common
- B. dot1x system-auth-control
- C. ip device tracking
- D. authentication display new-style
Answer: C
NEW QUESTION # 112
A customer is concerned that their wireless network is detecting spurious threats from channels that are not being used by their wireless infrastructure. Which two technologies must they deploy? (Choose two.)
- A. sniffer mode with no submode
- B. local mode with WIPS submode
- C. monitor mode
- D. FlexConnect mode
- E. rogue detector mode
Answer: B,C
NEW QUESTION # 113
An engineer has configured Media Stream on the WLC and must guarantee at least 2 Mbps stream per user.
Which RRC template should the engineer use?
- A. coarse
- B. medium
- C. low
- D. ordinary
Answer: B
Explanation:
Explanation
Graphical user interface, text, application, chat or text message Description automatically generated
NEW QUESTION # 114
Refer to the exhibit.
A network administrator deploys the DHCP profiler service in two ISE servers: 10.3.10.101 and 10.3.10.102. All BYOD devices connecting to WLAN on VLAN63 have been incorrectly profiled and are assigned as unknown profiled endpoints. Which action efficiently rectifies the issue according to Cisco recommendations?
- A. Disable DHCP proxy on the Cisco WLC.
- B. Keep DHCP proxy enabled on the Cisco WLC and define helper-address under the VLAN interface to point to the two ISE servers.
- C. Nothing needed to be added on the Cisco WLC or VLAN interface. The ISE configuration must be fixed.
- D. Disable DHCP proxy on the Cisco WLC and run the ip helper-address command under the VLAN interface to point to DHCP and the two ISE servers.
Answer: D
NEW QUESTION # 115
Refer to the exhibit.
An engineer tries to manage the rogues on the Cisco WLC. Based on the configuration, which AP is marked as malicious by the controller?
- A. rogue AP with SSlD admin seen for 4000 seconds and heard at -60 dBm
- B. rogue AP with SSlD admin seen for 4000 seconds and heard at -70 dBm
- C. rogue AP with SSID admin seen for 3000 seconds and heard at -70 dBm
- D. rogue AP with SSID admin seen for 3000 seconds and heard at -60 dBm
Answer: C
Explanation:
NEW QUESTION # 116
The Cisco Hyperlocation detection threshold is currently set to -50 dBm. After reviewing the wireless user location, discrepancies have been noticed. To improve the Cisco Hyperlocation accuracy, an engineer attempts to change the detection threshold to -100 dBm However, the Cisco Catalyst 9800 Series Wireless Controller does not allow this change to be applied. What actions should be taken to resolve this issue'
- A. Shutdown all radios on the controller, change the Cisco Hyperlocation detection range, and enable the radios again.
- B. Create a new profile on Cisco CMX with the new Cisco Hyperlocation detection range, and apply it on the WL AN.
- C. Disable Cisco Hyperlocation. change the Cisco Hyperlocation detection threshold and then enable it
- D. Place the APs to monitor mode shutdown the radios, and then change Cisco Hyperlocation detection threshold
Answer: B
NEW QUESTION # 117
On a branch office deployment, it has been noted that if the FlexConnect AP is in standalone mode and loses connection to the WLC, all clients are disconnected, and the SSID is no longer advertised. Considering that FlexConnect local switching is enabled, which setting is causing this behavior?
- A. FlexConnect Local Auth is disabled
- B. ISE NAC is enabled
- C. 802.11r Fast Transition is enabled
- D. Client Exclusion is enabled
Answer: A
Explanation:
NEW QUESTION # 118
A customer recently upgraded the network to Cisco SD-Access. Cisco DNA Center manages the wireless network; all SSIDs are Fabric-enabled. Cisco DNA Center must be able to classify ogue on Wire" APs. Which action must the customer take?
- A. Connect APs to the network using a trunk port with native VLAN.
- B. Disable all the DCA channels under RRM on the WLC.
- C. Configure all access switches to be managed by Cisco DNA Center.
- D. Allow SNMPv3 between Cisco DNA Center and access switches.
Answer: C
NEW QUESTION # 119
......
Penetration testers simulate 300-430 exam: https://www.dumpsvalid.com/300-430-still-valid-exam.html
Free Test Engine For Implementing Cisco Enterprise Wireless Networks Certification Exams: https://drive.google.com/open?id=13SYZNFxZr_tnHb4yFKHLsxFo33GUN2E5