VMware 5V0-31.22 Dumps - The Sure Way To Pass Exam
5V0-31.22 Exam Questions (Updated 2024) 100% Real Question Answers
VMware 5V0-31.22 exam is a challenging certification that requires a solid understanding of VMware Cloud Foundation technologies. Candidates are required to have hands-on experience with VMware Cloud Foundation, vSphere, vSAN, NSX, and vRealize Suite. They should also be familiar with cloud computing concepts, such as infrastructure as a service (IaaS), platform as a service (PaaS), and software as a service (SaaS). With this certification, professionals can demonstrate their expertise in VMware Cloud Foundation and advance their careers in cloud computing and virtualization.
NEW QUESTION # 82
A customer would like to use VCF in two new regional data centers, and they have a hard requirement to stretch layer 2 networks across the two sites. Both sites have a 130ms latency.
What would be the ideal solution?
- A. VCF with NSX-T Federation
- B. VCF with NSX-T Bridging
- C. VCD with NSX-T IPSEC
- D. VCF with NSX-T Multi-Site
Answer: A
Explanation:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.2/administration/GUID-F3A0A27E-88C0-4A64-8754-33CED93985D3.html
NEW QUESTION # 83
Which two configuration steps must a VMware Cloud Foundation administrator apply to achieve north/south connectivity while setting up an edge VM node for a workload domain from the SDDC Manager user interface? (Choose two.)
- A. OSPF Configuration
- B. BGP Configuration
- C. NSX VDS Uplinks
- D. vSphere VDS Uplinks
- E. ToR Switches VRFs
Answer: C,D
Explanation:
The two configuration steps that a VMware Cloud Foundation administrator must apply to achieve north/south connectivity while setting up an edge VM node for a workload domain from the SDDC Manager user interface are:
NSX VDS Uplinks
BGP Configuration
According to the web search results, the NSX VDS uplinks are required to connect the edge VM node to the physical network and provide north/south traffic for the overlay and public networks. The NSX VDS uplinks must be configured with named teaming policies that pin the traffic to specific VLANs and uplink ports1. The BGP configuration is required to enable dynamic routing between the NSX Tier-0 gateway and the physical routers. The BGP configuration must be done on both the NSX-T Data Center and the ToR switches2.
NEW QUESTION # 84
Which type of service is provided when deploying a 3-node clustered Workspace ONE Access using vRealize Suite Lifecycle Manager?
- A. Automation Services
- B. Identity and Access Management Services
- C. Runtime Services
- D. Operations Management Services
Answer: B
Explanation:
https://docs.vmware.com/en/VMware-Cloud-Foundation/5.0/vcf-admin/GUID-6904A34A-1F67-
4BBA-ACE8-12F039EC97E9.html
To provide identity and access management services to the cross-instance SDDC components, you create a global environment in vRealize Suite Lifecycle Manager in which you deploy a 3- node clustered Workspace ONE Access instance.
NEW QUESTION # 85
A VMware architect has been asked to design a VMware Cloud Foundation solution for an online gaming company.
The Chief Information Officer (CIO) of the company has asked the architect to focus on these requirements:
- The environment should be optimized for maximum hardware utilization.
- The environment should be highly available.
Which method meets these requirements and is supported for vCenter Server with VMware Cloud Foundation?
- A. vSphere HA
- B. vCenter HA
- C. Storage level snapshots
- D. vSphere FT
Answer: A
Explanation:
https://docs.vmware.com/en/VMware-Cloud-Foundation/4.5/vcf-management-domain- design/GUID-B4380728-190C-428E-83AE-3F7667506948.html VMware Cloud Foundation supports only vSphere High Availability (vSphere HA) as a high availability method for the management domain vCenter Server.
NEW QUESTION # 86
Which functionality is provided by NSX Global Manager?
- A. Configurations requiring protection against site failures must be configured in the Global Manager.
- B. Global configurations are sent to all Local Managers.
- C. Global Managers move all existing Local Manager configuration to the Global Manager.
- D. Global Managers move control plane to a central place.
Answer: B
Explanation:
https://docs.vmware.com/en/VMware-NSX/4.1/administration/GUID-48A7A433-F3A0-4F77-99C4-B6280CD5D3F4.html
NEW QUESTION # 87
A customer purchased six new HPE ProLiant DL380 Gen10 hosts and is interested in deploying a VCF infrastructure that will co-exist with the current VMware on AWS cloud DR solution in a hybrid model.
The architect suggests the VCF architecture that will help the customer run the workloads while offering workload isolation.
Which VCF architecture was suggested for this customer?
- A. 3-node management domain and 3-node VI workload domain in a VCF standard model, while leveraging resource pools
- B. 3-node management domain and 3-node VI workload domain in a VCF standard model
- C. 6-node management/workload domain in a VCF consolidated model, while leveraging resource pools
- D. 6-node management/workload domain in a VCF consolidated model
Answer: C
NEW QUESTION # 88
Which functionality does a NSX Tier-1 Gateway provide to a vSphere with Tanzu deployment?
- A. Downlink connection to segments
- B. Layer 2 Switching
- C. Static or dynamic routing
- D. Downlink connection to Tier-0 gateway
Answer: A
Explanation:
https://docs.vmware.com/en/VMware-Validated-Design/6.2/sddc-architecture-and-design-for-a- vsphere-with-tanzu-workload-domain/GUID-8E524188-65F6-4FF2-B8A3-2D9B0C86FE2A.html
NEW QUESTION # 89
What is a valid procedure to replace an expired vSAN license in a VMware Cloud Foundation environment?
- A. 1 Add a new vSAN license to the SDDC Manager and vCenter Server.
2. Reassign the vSAN license to the cluster in the vCenter Server.
3. Remove the expired vSAN license from the SDDC Manager and vCenter Server. - B. 1 Add a new vSAN license to the SDDC Manager.
2. Reassign the vSAN license to the cluster in the SDDC Manager.
3. Remove the expired vSAN license from the SDDC Manager - C. 1 Add a new vSAN license to the SDDC Manager.
2. Connect to SDDC Manager via SSH, and then restart Domain Manager using systemctl restart domainmanager. 3 Verify in the SDDC Manager whether a new vSAN license has been assigned to the cluster. - D. 1 Add a new vSAN license to the vCenter Server.
2. Connect to SDDC Manager via SSH, and then restart Lifecycle Management using systemctl restart Icm.
3. Verify in the vCenter Server whether a new vSAN license has been assigned to the cluster.
Answer: A
Explanation:
Explanation
a valid procedure to replace an expired vSAN license in a VMware Cloud Foundation environment is Option A.
You can add a new vSAN license to both the SDDC Manager and vCenter Server. Then reassign the vSAN license to the cluster in the vCenter Server . Finally, remove the expired vSAN license from both SDDC Manager and vCenter Server 2.
https://my-cloudy-world.com/2022/06/28/updating-a-vsan-license-in-vmware-cloud-foundation/
NEW QUESTION # 90
An administrator successfully finished restoring a SDDC Manager and now needs to verify its operation.
Which tool should the administrator use for this verification?
- A. vRealize Operation plugin tool for VCF
- B. Support and Serviceability (SoS) tool
- C. Ruby vSphere Console VCF check tool
- D. SDDC Manager GUI restore health tool
Answer: B
NEW QUESTION # 91
An administrator is tasked with creating a new VMware Cloud Foundation VI workload Domain using vVOLs as the principal storage.
Which three storage protocols are supported for the new commissioned hosts? (Choose three.)
- A. FCoE
- B. NFS
- C. iSCSI
- D. SCSI
- E. SAS
- F. FC
Answer: B,C,F
Explanation:
According to the VMware Cloud Foundation documentation1, vVols supports FC, NFS, and iSCSI storage protocol types for principal storage. These are the protocols that are supported for the new commissioned hosts that will be used for the VI workload domain.
SCSI, FCoE, and SAS are not supported storage protocols for vVols in VMware Cloud Foundation.
NEW QUESTION # 92
VCF design workshops were conducted, and the architect collected the following customer requirements for the newly planned VCF infrastructure:
- The new VCF infrastructure must target two zones: DEV/UAT and DMZ.
- The security team would like to have full management and network isolation between these two zones.
- 12 hosts have been ordered for the solution.
- DEV/UAT workloads must comply with an erasure coding vSAN storage policy with the ability to tolerate the failure of two hosts.
Which workload domain sizing will be required to achieve these requirements?
- A. 12-hosts workload domain for both zones, having a 4-hosts DEV cluster, a 4-hosts UAT cluster, and a 4-hosts DMZ cluster
- B. 12-hosts workload domain for both zones, having an 8-hosts DEV/UAT cluster, and a 4-hosts DMZ cluster
- C. 8-hosts DEV/UAT workload domain, having an 8-hosts DEV/UAT cluster, and a 4-hosts DMZ workload domain, having a 4-hosts DMZ cluster
- D. 8-hosts DEV/UAT workload domain, having a 4-hosts DEV cluster, and a 4-hosts UAT cluster, in addition to a 4-hosts DMZ workload domain, having a 4-hosts DMZ cluster
Answer: C
Explanation:
https://docs.vmware.com/en/VMware-Cloud-on-AWS/services/com.vmware.vsphere.vmc-aws- manage-data-center-vms.doc/GUID-EDBB551B-51B0-421B-9C44-6ECB66ED660B.html
NEW QUESTION # 93
Which two options are only available when using vSphere Lifecycle Manager Images? (Choose two.)
- A. Update the firmware of all ESXi hosts in a cluster.
- B. Upgrade and patch ESXi hosts.
- C. Upgrade VM Hardware Compatibility versions.
- D. Check the hosts and clusters against the vSAN Hardware Compatibility List.
- E. Install and update third-party software on all ESXi hosts in a cluster.
Answer: A,E
Explanation:
https://docs.vmware.com/en/VMware-vSphere/7.0/com.vmware.vsphere-lifecycle- manager.doc/GUID-9A20C2DA-F45F-4C9B-9D17-A89BCB62E6EF.html
NEW QUESTION # 94
Which two features are supported when implementing NSX Federation? (Choose two.)
- A. Load Balancer
- B. DHCP
- C. NAT operations
- D. Identity Firewall
- E. DHCP dynamic binding
Answer: B,C
Explanation:
This is because according to VMware documentation2, these are some of the features that are supported when implementing NSX Federation:
NAT operations: You can configure NAT rules for Tier-0 gateways across locations.
Load Balancer: You can configure load balancer services for Tier-0 gateways across locations.
NEW QUESTION # 95
An administrator is tasked with resetting a root password which has expired for one of the Workspace One Access (WSA) cluster nodes. The administrator has already reset the password directly on the WSA cluster node(s).
Which additional step must the administrator take to update the password in the SDDC Manager database?
- A. Rotate the password in SDDC Manager using the "Rotate Now" button.
- B. Schedule the password rotation in SDDC Manager in the next five minutes using the "Schedule Rotation" button.
- C. Manually change the password in SDDC Manager using the "Update" button.
- D. Remediate the password in SDDC Manager using the "Remediate" button.
Answer: D
Explanation:
You should remediate the password. That option is used to sync password that were changed direclly on component product managed by SDDC manager.
https://docs.vmware.com/en/VMware-Cloud-Foundation/5.0/vcf-admin/GUID-92E16E2F-9053-4BBA-9BF9-7B5065C680CF.html
NEW QUESTION # 96
A VMware administrator is deploying a NSX Edge cluster using SDDC Manager. The manager wants to know if the NSX Edge nodes can be removed at a later time, knowing that there is no budget for adding additional hardware to the VMware Cloud Foundation (VCF) infrastructure.
Which three statements accurately answer this manager's question about NSX Edge nodes? (Choose three.)
- A. They can only be removed if the NSX Edge cluster is not stretched.
- B. They can only be removed if the NSX Edge node was deployed from NSX-T Manager directly.
- C. They can be removed if there are at least two nodes in the NSX Edge cluster.
- D. They can only be removed if the NSX Edge cluster is available in the SDDC Manager inventory and is active.
- E. They can be removed at any time if they are in a powered-off state.
- F. They can only be removed if the NSX Edge node is available in the SDDC Manager inventory.
Answer: A,D,F
Explanation:
"You can remove NSX Edge nodes from an NSX Edge Cluster that you created with SDDC Manager if you need to scale down to meet business needs.
Prerequisites
-The NSX Edge cluster must be available in the SDDC Manager inventory and must be Active.
-The NSX Edge node must be available in the SDDC Manager inventory.
-The NSX Edge cluster must be hosted on one or more vSphere clusters from the same workload domain.
-The NSX Edge cluster must contain more than two NSX Edge nodes.
-The NSX Edge cluster must not be federated or stretched.
-If the NSX Edge cluster was deployed with a Tier-0 Service High Availability of Active-Active, the NSX Edge cluster must contain two or more NSX Edge nodes with two or more Tier-0 routers (SR component) after the NSX Edge nodes are removed.
-If selected edge cluster was deployed with a Tier-0 Service High Availability of Active-Standby, you cannot remove NSX Edge nodes that are the active or standby node for the Tier-0 router." These three statements accurately answer the manager's question about NSX Edge nodes. Here is a brief explanation for each statement:
B) They can only be removed if the NSX Edge cluster is available in the SDDC Manager inventory and is active. This is a prerequisite for removing NSX Edge nodes from an NSX Edge cluster using SDDC Manager. If the NSX Edge cluster is not available or not active, you cannot remove NSX Edge nodes from it1 C) They can only be removed if the NSX Edge cluster is not stretched. This is another prerequisite for removing NSX Edge nodes from an NSX Edge cluster using SDDC Manager. If the NSX Edge cluster is stretched across different sites, you cannot remove NSX Edge nodes from it using SDDC Manager. You need to use the VMware Cloud Foundation NSX-T Edge Cluster Deployment Removal Tool instead12 E) They can only be removed if the NSX Edge node is available in the SDDC Manager inventory. This is also a prerequisite for removing NSX Edge nodes from an NSX Edge cluster using SDDC Manager. If the NSX Edge node is not available in the SDDC Manager inventory, you cannot remove it using SDDC Manager. You need to delete it from the NSX-T Manager UI instead13 A) They can be removed at any time if they are in a powered-off state. This is not a correct statement, because powering off the NSX Edge nodes does not affect their removal process using SDDC Manager. You can remove NSX Edge nodes that are powered on or powered off, as long as they meet the other prerequisites1 D) They can be removed if there are at least two nodes in the NSX Edge cluster. This is not a correct statement, because the minimum number of nodes in an NSX Edge cluster depends on the Tier-0 service high availability mode that was selected during the deployment. If the mode was Active-Active, you need at least two nodes in the NSX Edge cluster after removing any nodes. If the mode was Active-Standby, you need at least one node in the NSX Edge cluster after removing any nodes1 F) They can only be removed if the NSX Edge node was deployed from NSX-T Manager directly. This is not a correct statement, because the question is about removing NSX Edge nodes that were deployed using SDDC Manager, not NSX-T Manager directly. If the NSX Edge node was deployed from NSX-T Manager directly, you cannot remove it using SDDC Manager, but you can delete it from the NSX-T Manager UI.
NEW QUESTION # 97
Which two components are required when planning a VMware Cloud Foundation stretched cluster? (Choose two.)
- A. One Witness ESXi Appliance in the third site
- B. Two Witness ESXi Appliances in the third site
- C. Two Witness ESXi Appliances in the preferred site
- D. Two physical ESXi hosts in the preferred site
- E. Three physical ESXi hosts in the preferred site
Answer: A,E
NEW QUESTION # 98
Which vSphere Lifecycle Manager (LCM) function is supported in VMware Cloud Foundation (VCF)?
- A. Manage certificate replacement for ESXi hosts.
- B. Rotate passwords for ESXi hosts.
- C. Install and update third-party software on ESXi hosts.
- D. Downgrade VM hardware version.
Answer: C
NEW QUESTION # 99
Which three options are valid use cases for multiple clusters in a workload domain? (Choose three.)
- A. Workload domain with multiple availability zones each containing clusters
- B. One cluster distributed across two racks and one workload domain
- C. Workload domain with multiple clusters in one rack
- D. One stretched cluster across two regions and two workload domains
- E. Two clusters forming one stretched workload domain
- F. One cluster stretching two workload domains
Answer: A,C,E
Explanation:
Explanation
These are valid use cases for multiple clusters in a workload domain according to VMware documentation. A workload domain with multiple availability zones each containing clusters can provide high availability and disaster recovery by distributing workloads across different physical locations within a region. A workload domain with multiple clusters in one rack can provide scalability and flexibility by allowing different configurations and policies for different clusters within a single logical unit. Two clusters forming one stretched workload domain can provide resiliency and fault tolerance by synchronizing data across two sites within a region.
NEW QUESTION # 100
An administrator is tasked with preparing hosts for the deployment of a new Workload Domain in a VMware Cloud Foundation environment. The ESXi hosts have HBA cards that require the installation of a separate and the most recent VMware Installation Bundles (VIBs).
Which ESXi imaging method should the administrator use?
- A. VMware vSphere Lifecycle Manager Image
- B. VMware Imaging Appliance
- C. VMware vSphere Auto Deploy
- D. Download and burn the base ESXi Installer ISO Image to a DVD
Answer: B
Explanation:
Preparing the ESXi hosts involves installing the correct version of ESXi and performing some basic configuration tasks. VMware Cloud Foundation supports two methods for preparing these ESXi hosts, either interactively or through the use of the VMware Imaging Appliance service (VIA) which is bundled within VMware Cloud Builder.
NEW QUESTION # 101
What are the minimum hardware requirements to run customer workloads within a cluster in a VI workload domain considering maintenance operations without risking availability?
- A. Four vSAN Ready Nodes with two 25GbE NICs
- B. Two vSAN Ready Nodes (ROBO) with two 10GbE NICs, and optionally one 1GbE BMC NIC
- C. Three vSAN Ready Nodes with two 25GbE NICs
- D. Three vSAN Ready Nodes with two 10GbE NICs, and optionally one 1GbE BMC NIC
Answer: D
Explanation:
https://docs.vmware.com/en/VMware-Cloud-
Foundation/3.10/com.vmware.vcf.planprep.doc_310/GUID-AE45ED7B-5530-4AE6-BB51-
51E3D41CEDFD.html
NEW QUESTION # 102
An administrator is tasked with deploying a VMware Cloud Foundation environment that consists of three VI Workload Domains. Each VI Workload Domain is comprised of two clusters, with 18 hosts in each cluster.
Which option fulfills this requirement while minimizing the number of NSX-T Manager instances?
- A. Deploy one medium-sized NSX-T Manager cluster per VI Workload Domain
- B. Deploy one large-sized NSX-T Manager cluster for all VI Workload Domains.
- C. Deploy one large-sized NSX-T Manager cluster per VI Workload Domain.
- D. Deploy one medium-sized NSX-T Manager cluster for all VI Workload Domains.
Answer: D
Explanation:
According to NSX Manager VM and Host Transport Node System Requirements23, an NSX-T management cluster formed using a medium-sized appliance can support up to 128 hypervisors. Since each VI Workload Domain has 36 hosts (18 x 2), and there are three VI Workload Domains, the total number of hosts is 108 (36 x 3), which is within the limit of a medium-sized NSX-T Manager cluster.
NEW QUESTION # 103
An administrator is tasked with deploying a new VI Workload Domain into an existing VMware Cloud Foundation environment. Which three initial shared storage types are supported? (Choose three.)
- A. vVols
- B. VMFS on iSCSI
- C. NFSV4.1
- D. vSAN
- E. SMB 3.0
- F. NFSv3
Answer: B,D,F
Explanation:
This is because according to VMware documentation6, these are three initial shared storage types that are supported for deploying a new VI Workload Domain into an existing VCF environment. You can also add other supported storage types after deploying the VI Workload Domain.
NEW QUESTION # 104
The architect of a multi-site VMware Cloud Foundation solution is tasked with ensuring that the prerequisites for vSAN data at rest encryption have been achieved. The existing design calls for use of the vSphere Native Key Provider. NSX-T is configured with Federation, and both sites benefit from a stretched T0 and T1 network topology.
A new security policy requires the use of vSphere Virtual Machine encryption, in addition to the at-rest encryption already configured. During a failover test from Site-A to Site-B using Site Recovery Manager, the virtual machines were unable to power-on.
How does the design need to be changed to support the new requirement?
- A. Ensure that a TPM 2.0 certified module is installed on all ESXi hosts at Site-B.
- B. Ensure that the Site Recovery Manager service account has Cryptographer.ReadKeyServersInfo privileges.
- C. Use a third-party KMS solution at each site.
- D. Use a third-party KMS solution that allows for key replication.
Answer: D
NEW QUESTION # 105
......
VMware 5V0-31.22 is an exam designed for IT professionals who aim to become VMware Cloud Foundation Specialists. VMware Cloud Foundation Specialist (v2) certification validates the candidate's knowledge and skills in designing, deploying, and managing the VMware Cloud Foundation solution. 5V0-31.22 exam is intended for those who already have experience in data center virtualization, cloud infrastructure, and VMware technologies.
Pass VMware 5V0-31.22 Exam Quickly With DumpsValid: https://www.dumpsvalid.com/5V0-31.22-still-valid-exam.html
Prepare 5V0-31.22 Question Answers - 5V0-31.22 Exam Dumps: https://drive.google.com/open?id=1E2svVazwSOxwilrXNOtIvi-S6N28RcxQ