Updated Jul 01, 2024 Verified Pass 500-220 Exam in First Attempt Guaranteed
Free 500-220 Sample Questions and 100% Cover Real Exam Questions (Updated 74 Questions)
NEW QUESTION # 37
Which order is accurate for a firmware upgrade on MX appliances in a high-availability configuration?
- A. starts on the secondary MX appliance and then occurs on the primary MX appliance
- B. starts on the primary MX appliance and then occurs on the secondary MX appliance
- C. starts on both MX appliances at the same time and then reboots both appliances after traffic on the primary MX appliance ceases
- D. starts on both MX appliances at the same time and then immediately reboots both appliances
Answer: B
NEW QUESTION # 38
Which enrollment method must be used when containerization is required on BYOD Android devices managed by Systems Manager?
- A. Systems Manager container ID
- B. Android Business utilizing a BYOD Profile
- C. Systems Manager network ID
- D. Android Enterprise utilizing a Work Profile
Answer: D
Explanation:
Explanation
https://documentation.meraki.com/SM/Device_Enrollment/Containerization_with_Systems_Manager
NEW QUESTION # 39
Which three verbs of request are available in the Cisco Meraki API? (Choose three.)
- A. ADD
- B. POST
- C. PATCH
- D. SET
- E. PUT
- F. GET
Answer: B,E,F
Explanation:
Explanation
Verbs in the API follow the usual REST conventions:
GET returns the value of a resource or a list of resources, depending on whether an identifier is specified.
POST adds a new resource
PUT updates a resource
DELETE removes a resource
https://documentation.meraki.com/General_Administration/Other_Topics/Cisco_Meraki_Dashboard_API
NEW QUESTION # 40
For which two reasons can an organization become "Out of License"? (Choose two.)
- A. more hardware devices than device licenses
- B. expired device license
- C. licenses that are in the wrong network
- D. MR licenses that do not match the MR models in the organization
- E. licenses that do not match the serial numbers in the organization
Answer: A,B
Explanation:
More hardware devices than device licenses: An organization needs to have enough device licenses to cover all the hardware devices in its network. A device license is consumed by each device that is added to the network. If the number of devices exceeds the number of licenses, the organization will be out of license and will lose access to some features and support until it purchases more licenses or removes some devices4.
Expired device license: A device license has an expiration date that depends on the license term purchased by the organization. If a device license expires, it will no longer be valid and will not count towards the license limit. The organization will need to renew the expired license or purchase a new one to avoid being out of license4.
NEW QUESTION # 41
Refer to the exhibit.
What is an advantage of implementing inter-VLAN routing on an MX Security Appliance rather than performing inter-VLAN routing on an MS Series Switch?
- A. The MX appliance performs content filtering for inter-VLAN traffic.
- B. The MX appliance performs data encryption for inter-VLAN traffic.
- C. The MX appliance performs IDS/IPS for inter-VLAN traffic.
- D. The MX appliance performs AMP for inter-VLAN traffic.
Answer: B
NEW QUESTION # 42
Drag and drop the settings from the left into the boxes on the right to indicate if the setting will be cloned or not cloned using the Cisco Meraki MS switch cloning feature.
Answer:
Explanation:
Explanation
The settings that will be cloned using the Cisco Meraki MS switch cloning feature are:
port name
interface type
STP bridge property
The settings that will not be cloned using the Cisco Meraki MS switch cloning feature are:
switch management IP
switch name
NEW QUESTION # 43
Refer to the exhibit.
For an AP that displays this alert, which network access control method must be in use?
- A. WPA2-enterprise with my RADIUS server
- B. MAC-based access control with RADIUS server
- C. splash page with my RADIUS server
- D. preshared key
Answer: D
NEW QUESTION # 44
Refer to the exhibit.
This Dashboard organization uses Co-Termination licensing model.
What happens when an additional seven APs are claimed on this network without adding licenses?
- A. All APs immediately stop functioning.
- B. One AP Immediately stops functioning.
- C. All APs stop functioning in 30 days.
- D. All network devices stop functioning in 30 days.
Answer: D
Explanation:
Explanation
The number of devices in an organization can not exceed the license limits. If this occurs, the organization will enter a 30-day grace period, during which the organization must be brought back into compliance, otherwise it will be shut down until proper licensing is applied to the organization.
https://documentation.meraki.com/General_Administration/Licensing/Meraki_Co-Termination_Licensing_Overv
NEW QUESTION # 45
Which information do the MXs in a High Availability pair share?
- A. time synchronization state
- B. stateful firewall database
- C. DHCP association database
- D. spanning-tree state
Answer: D
NEW QUESTION # 46
What is the best practice Systems Manager enrollment method when deploying corporate-owned iOS devices?
- A. manual
- B. Sentry enrollment
- C. Apple Configurator
- D. DEP
Answer: C
NEW QUESTION # 47
Which two actions can extend the video retention of a Cisco Meraki MV Smart Camera? (Choose two.)
- A. installing an SSD memory extension
- B. enabling maximum retention limit
- C. enabling audio compression
- D. configuring a recording schedule
- E. enabling motion-based retention
Answer: D,E
Explanation:
Explanation
https://documentation.meraki.com/MV/Advanced_Configuration/Scheduled_Recording By default, the Meraki security camera's will record continuously 24/7. In some situations, certain times of day are not allowed to be recorded. Scheduled recording covers this requirement as well as improve the video retention capabilities of the camera.
NEW QUESTION # 48
Refer to the exhibit.
What does the MX Security Appliance send to determine whether VPN traffic exceeds the configured latency threshold in the VoIP custom performance class?
- A. 100-byte UDP probes every second, through VPN tunnels that are established over every WAN link.
- B. 1000-byte TCP probes every second, through VPN tunnels that are established over every WAN link.
- C. 100-byte UDP probes every second, through VPN tunnels that are established over the primary WAN link.
- D. 1000-byte TCP probes every second, through VPN tunnels that are established over the primary WAN link.
Answer: B
NEW QUESTION # 49
Refer to the exhibit.
During a Meraki AP deployment, the default SSID that the exhibit shows is broadcast. What causes this behavior?
- A. An AP has Site Survey mode enabled.
- B. An AP cannot connect to the default gateway.
- C. An AP does not have a wired connection to the network.
- D. An AP has never connected to the Meraki Cloud Controller.
Answer: D
Explanation:
Reference:
Troubleshooting_local_connection_issues_using_default_SSID_on_MR_Access_Points
NEW QUESTION # 50
Refer to the exhibit.
Which two configurations are needed to successfully monitor custom applications that a user is accessing using Cisco Meraki Insight? (Choose two)
- A. The custom application uses HTTPS on port 8080.
- B. The custom application uses TLS on any ports.
- C. The custom application uses HTTP on port 8080.
- D. The custom application uses SMB/CIFS.
- E. The custom application uses HTTPS on TCP 443.
Answer: C,E
Explanation:
Explanation
https://documentation.meraki.com/MI/MI_Web_App_Health/Overview#:~:text=On%20this%20page%2C%20yo
NEW QUESTION # 51
What are two organization permission types? (Choose two.)
- A. Write
- B. Full
- C. Read-only
- D. Write-only
- E. Monitor-only
Answer: B,C
Explanation:
Reference:
Managing_Dashboard_Administrators_and_Permissions
NEW QUESTION # 52
A Cisco Meraki MV camera is monitoring an office and its field of vision currently captures work desks and employee computer screens. However, recording employee computer screens is prohibited by local regulation.
Which feature in Dashboard can be used to preserve the current position of the camera while also meeting regulation requirements?
- A. restricted mode
- B. area or interest
- C. privacy window
- D. zone exclusion
- E. sensor crop
Answer: C
Explanation:
Explanation
https://documentation.meraki.com/MV/Initial_Configuration/Privacy_Windows
NEW QUESTION # 53
Which two Systems Manager Live tools are available only for Apple Macs and Windows PCs and cannot be used on iOS or Android mobile devices? (Choose two.)
- A. Selective wipe
- B. Remote Desktop
- C. Screenshot
- D. OS updates
- E. Send notification
Answer: A,B
NEW QUESTION # 54
Refer to the exhibit.
A packet arrives on the VPN concentrator with source IP 10.168.70.3 and destined for IP 10.116.32.4.
What is the next hop for the packet, based on this concentrator routing table?
- A. Not enough detail is available to determine the next hop.
- B. The packet is stopped.
- C. The concentrator gateway (10.128.124.62) is the next hop.
- D. The Auto VPN peer "Store 1532 - appliance" is the next hop.
Answer: A
NEW QUESTION # 55
Refer to the exhibit.
For an AP that displays this alert, which network access control method must be in use?
- A. WPA2-enterprise with my RADIUS server
- B. MAC-based access control with RADIUS server
- C. preshared key
- D. splash page with my RADIUS server
Answer: A
Explanation:
Explanation
This is because the alert mentions 802.1X failure, which is a network access control method that is used with WPA2-enterprise and RADIUS servers1.
This question is related to the topic of Wireless Access Points Quick Start in the Cisco Meraki documentation.
You can find more information about this topic in the Wireless Access Points Quick Start article or the Using the Cisco Meraki Device Local Status Page page.
NEW QUESTION # 56
Refer to the exhibit.
This Dashboard organization uses Co-Termination licensing model.
What happens when an additional seven APs are claimed on this network without adding licenses?
- A. All APs immediately stop functioning.
- B. One AP Immediately stops functioning.
- C. All APs stop functioning in 30 days.
- D. All network devices stop functioning in 30 days.
Answer: D
NEW QUESTION # 57
Drag and drop the steps from the left into the sequence on the right to manage device control, according to Cisco Meraki best practice.
Answer:
Explanation:
NEW QUESTION # 58
......
Download Real Cisco 500-220 Exam Dumps Test Engine Exam Questions: https://www.dumpsvalid.com/500-220-still-valid-exam.html
Verified 500-220 Dumps Q&As - 500-220 Test Engine with Correct Answers: https://drive.google.com/open?id=1g64Mz0zbJfCGimNxdD7O-SkxbQnnGcd0