Pass Cisco 300-410 PDF Dumps | Recently Updated 563 Questions
Updated Test Engine to Practice 300-410 Dumps & Practice Exam
Detailed Overview of Cisco 300-410 Exam
Cisco doesn’t reveal the details of its certification exams beforehand. You can’t find the information regarding the number of questions or their types before you actually sit for the real test. The passing scores for the exams are also not disclosed by the vendor and are subject to change.
What is known about the Cisco 300-410 exam is that you will have 90 minutes to complete all the questions. The test is delivered in the English or Japanese languages. To schedule this exam, you will need to create an account on the Pearson VUE platform. After that, you will have to pay the enrollment fee and choose one of the delivery options. You can take it in person at one of the testing centers or online from the comfort of your home or office.
Cisco 300-410 is one of the concentration exams that the applicants seeking to earn the CCNP Enterprise certificate can choose. Within this certification path, they will need also to pass one core test, known as Implementing Cisco Enterprise Network Core Technologies (ENCOR) or 350-401 ENCOR. Only acing both these exams makes you eligible for getting the professional-level certificate. As for Cisco Certified Specialist – Enterprise Advanced Infrastructure Implementation, the 300-410 test is the only requirement for this certification.
As any other professional- or specialist-level certifications of this vendor, CCNP Enterprise and Cisco Certified Specialist – Enterprise Advanced Infrastructure Implementation are valid for three years from the date of award. After the expiration of this period, the individuals will need to recertify to maintain their status. They can do that by taking additional exams or completing continuing education activities.
NEW QUESTION # 50
Refer to the exhibit.
The output of the trace route from R5 shows a loop in the network. Which configuration prevents this loop?
- A.
- B.
- C.
- D.
Answer: C
Explanation:
The reason for the loop is that R2 is forwarding the packets destined to 10.1.1.1 to R4, instead of R1. This is because in the redistribute OSPF statement, BW metric has a higher value and delay has a value of 1. So, R2 chooses R4 over R1 for 10.1.1.0/24 subnet causing a loop. Now, R5 learns 10.1.1.0/24 from R3 and advertises the same route to R4, that R4 redistributes back in EIGRP. If R3 sets a tag of 1 while redistributing EIGRP in OSPF, and R4 denies all the OSPF routes with tag 1 while redistributing, it will not advertise 10.1.1.0/24 back into EIGRP. Hence, the loop will be broken.
NEW QUESTION # 51
Refer the exhibit.
Which action resolves intermittent connectivity observed with the SNMP trap packets?
- A. Add a new class map to match TCP traffic
- B. Add one new entry in the ACL 120 to permit the UDP port 161
- C. Increase the CIR of the mgmt class map
- D. Decrease the committed burst Size of the mgmt class map
Answer: B
NEW QUESTION # 52 
Refer to the exhibit After a misconfiguration by a junior engineer, the console access to router A is not working Which configuration allows access to router A?
A)
B)
C)
D)
- A. Option A
- B. Option D
- C. Option C
- D. Option B
Answer: C
NEW QUESTION # 53
Refer to the exhibit.
Refer to the exhibit. The services at branch B are down. An engineer notices mal rouler A and router B are not exchanging any routes Which configuration resolves the issue on router B?
- A.
- B.
- C.
- D.
Answer: A
NEW QUESTION # 54
Refer to the exhibit.
Refer to the exhibit. An engineer configured user login based on authentication database on the router, but no one can log into the router. Which configuration resolves the issue?
- A. aaa authorization network default local
- B. aaa authorization exec default local
- C. aaa authentication login default enable
- D. aaa authentication login default local
Answer: D
NEW QUESTION # 55
Drag and drop the LDP features from the left onto the descriptions on the right
Answer:
Explanation:
Explanation
Diagram Description automatically generated
The MPLS LDP Inbound Label Binding Filtering feature can be used to control the amount of memory used to store Label Distribution Protocol (LDP) label bindings advertised by other devices. For example, in a simple Multiprotocol Label Switching (MPLS) Virtual Private Network (VPN) environment, the VPN provider edge (PE) devices might require label switched paths (LSPs) only to their peer PE devices (that is, they do not need LSPs to core devices). Inbound label binding filtering enables a PE device to accept labels only from other PE devices.
NEW QUESTION # 56
Drag and drop the packet types from the left onto the correct descriptions on the right.
Answer:
Explanation:
NEW QUESTION # 57
Refer to the exhibit. A network administrator configured NTP on a Cisco router to get synchronized time for system and logs from a unified time source The configuration did not work as desired Which service must be enabled to resolve the issue?
- A. Enter the service timestamps log datetime synchronize global command.
- B. Enter the service timestamps log datetime console global command.
- C. Enter the service timestamps log datetime localtime global command.
- D. Enter the service timestamps log datetime clock-period global command
Answer: C
Explanation:
If a router is configured to get the time from a Network Time Protocol (NTP) server, the times in the router's log entries may be different from the time on the systemclock if the [localtime] option is not in the service timestamps log command. To solve this issue, add the [localtime] option to the service timestamps log command. Thetimes should now be synchronized between the system clock and the log message timestamps.
NEW QUESTION # 58
After some changes in the routing policy, it is noticed that the router in AS 45123 is being used as a transit AS router for several service provides. Which configuration ensures that the branch router in AS 45123 advertises only the local networks to all SP neighbors?
A)
B)
C)
D)
- A. Option A
- B. Option C
- C. Option D
- D. Option B
Answer: C
Explanation:
Explanation
By default BGP advertises all prefixes to external BGP neighbors. This means that if you are multi-homed (connected to two or more ISPs) then you might become a transit AS. For example, ISP 2 in AS 200 can send traffic to your router in AS 100 to reach ISP 3 in AS 300 because you advertised prefixes in ISP 3 to ISP 2.
This is what will be seen in the BGP routing table of ISP1:
NEW QUESTION # 59
An engineer needs dynamic routing between two routers and is unable to establish OSPF adjacency. The output of the show ip ospf neighbor command shows that the neighbor state is EXSTART/EXCHANGE. Which action should be taken to resolve this issue?
- A. match the network types
- B. match the hello timers
- C. match the passwords
- D. match the MTUs
Answer: D
Explanation:
NEW QUESTION # 60
Refer to the exhibit.
The output of the trace route from R5 shows a loop in the network. Which configuration prevents this loop?
- A.
- B.
- C.
- D.
Answer: A
Explanation:
Explanation
The reason for the loop is that R2 is forwarding the packets destined to 10.1.1.1 to R4, instead of R1. This is because in the redistribute OSPF statement, BW metric has a higher value and delay has a value of 1. So, R2 chooses R4 over R1 for 10.1.1.0/24 subnet causing a loop. Now, R5 learns 10.1.1.0/24 from R3 and advertises the same route to R4, that R4 redistributes back in EIGRP. If R3 sets a tag of 1 while redistributing EIGRP in OSPF, and R4 denies all the OSPF routes with tag 1 while redistributing, it will not advertise 10.1.1.0/24 back into EIGRP. Hence, the loop will be broken.
NEW QUESTION # 61
An engineer configured the wrong default gateway for the Cisco DNA center enterprise interface during the install.
Which command must the engineer run to correct the configuration?
- A. Sudo maglev reinstall
- B. Sudo maglev install config update
- C. Sudi update config install
- D. Sudo magiev-config update
Answer: D
NEW QUESTION # 62 
Refer to the exhibit While troubleshooting an issue on the network, an engineer notices that a TCP Connect operation failed on port 3000 between R101 and R201. Which command must be configured on R201 to respond to the R101 IP SLA configurations with a control connection on UDP port 1967?
- A. ip sla responder tcp-connect ipaddress 2.2.2.2 port 3001
- B. ip sla responder
- C. ip sla responder udp-echo ipaddress 1.1.1.1 port 1967
- D. ip sla responder tcp-connect ipaddress 1.1.1.1 port 3000
Answer: C
NEW QUESTION # 63 
Refer to the exhibit. An engineer has successfully set up a floating static route from the BRANCH router to the HQ network using HQ_R1 as the primary default gateway When the g0/0 goes down on HQ_R1, the branch network cannot reach the HQ network 192.168.20.0/24. Which set of configurations resolves the issue?
- A. BRANCH(config)# Ip sla 1
BRANCH(config-ip-sta)# Icmp-echo 192.168.100.1 - B. HQ R3(config)# Ip sla responder
HQ R3(config)# Ip sla responder Icmp-echo 172.16.35.5 - C. HQ_R3(config)# ip sla responder
HQ_R3(config)# ip sla responder icmp-echo 172.16.35.1 - D. BRANCH(config)# ip sla 1
BRANCH(config-ip-sla)# icmp-echo 192.168.100.2
Answer: A
NEW QUESTION # 64
Exhibit:
Bangkok is using ECMP to reach to the 192.168.5.0/24 network. The administrator must configure Bangkok in such a way that Telnet traffic from 192.168.3.0/24 and192.168.4.0/24 networks uses the HongKong router as the preferred router. Which set of configurations accomplishes this task?
- A. access-list 101 permit tcp 192.168.3.0 0.0.0.255 192.168.5.0 0.0.0.255 access-list 101 permit tcp 192.168.4.0 0.0.0.255 192.168.5.0 0.0.0.255
!
route-map PBR1 permit 10
match ip address 101
set ip next-hop 172.18.1.2
interface Ethernet0/3
ip policy route-map PBR1 - B. access-list 101 permit tcp 192.168.3.0 0.0.0.255 192.168.5.0 0.0.0.255 eq 23 access-list 101 permit tcp 192.168.4.0 0.0.0.255 192.168.5.0 0.0.0.255 eq 23
!
route-map PBR1 permit 10
match ip address 101
set ip next-hop 172.18.1.2
interface Ethernet0/1
ip policy route-map PBR1 - C. access-list 101 permit tcp 192.168.3.0 0.0.0.255 192.168.5.0 0.0.0.255 eq 23 access-list 101 permit tcp 192.168.4.0 0.0.0.255 192.168.5.0 0.0.0.255 eq 23
!
route-map PBR1 permit 10
match ip address 101
set ip next-hop 172.18.1.2
!
interface Ethernet0/3
ip policy route-map PBR1 - D. access-list 101 permit tcp 192.168.3.0 0.0.0.255 192.168.5.0 0.0.0.255 access-list 101 permit tcp 192.168.4.0 0.0.0.255 192.168.5.0 0.0.0.255
!
route-map PBR1 permit 10
match ip address 101
set ip next-hop 172.18.1.2
!
interface Ethernet0/1
ip policy route-map PBR1
Answer: C
Explanation:
We need to use Policy Based Routing (PBR) here on Bangkok router to match the traffic from 192.168.3.0/24 & 192.168.4.0/24 and "set ip next-hop" to HongKong router(172.18.1.2 in this case).
Note: Please notice that we have to apply the PBR on incoming interface e0/3 to receive traffic from 192.168.3.0/24 and 192.168.4.0/24.
NEW QUESTION # 65
Refer to the exhibit.
The ACL is placed on the inbound Gigabit 0/1 interface of the router. Host
192.168.10.10cannot SSH to host 192.168.100.10 even though the flow is permitted. Which action resolves the issue without opening full access to this router?
- A. Move the SSH entry to the beginning of the ACL
- B. Run the show access-list FILTER command to view if the SSH entry has any hit statistic associated with it
- C. Temporarily remove the ACL from the interface to see if the flow works
- D. Temporarily move the permit ip any any line to the beginning of the ACL to see if the flow works
Answer: A
NEW QUESTION # 66
Refer to the exhibit.
A network administrator logs into the router using TACACS+ username and password credentials, but the administrator cannot run any privileged commands Which action resolves the issue?
- A. Configure TACACS+ synchronization with the Active Directory admin group
- B. Configure full access for the username from TACACS+ server
- C. Configure the username from a local database
- D. Configure an authorized IP address for this user to access this router
Answer: B
NEW QUESTION # 67
Refer to Exhibit.
A network administrator added one router in the Cisco DNA Center and checked its discovery and health from the Network Health Dashboard. The network administrator observed that the router is still showing up as unmonitored. What must be configured on the router to mount it in the Cisco DNA Center?
- A. Configure router with SNMPv2c or SNMPv3 traps
- B. Configure router with the telemetry data
- C. Configure router with NetFlow data
- D. Configure router with routing to reach Cisco DNA Center
Answer: B
Explanation:
Explanation
Unmonitored: Unmonitored devices are devices for which Assurance did not receive any telemetry data during the specified time range.
NEW QUESTION # 68
Refer to the exhibits.
Phase-3 tunnels cannot be established between spoke-to-spoke in DMVPN. Which two commands are missing? (Choose two.)
- A. The ip shortcut commands is missing on the hub router.
- B. The ip nhrp redirect command is missing on the spoke routers.
- C. The ip nhrp command is missing on the hub router.
- D. The ip nhrp shortcut command is missing on the spoke routers.
- E. The ip redirect commands is missing on the hub router.
Answer: D,E
NEW QUESTION # 69
Refer to the exhibit.
R1 is connected with R2 via GigabitEthernet0/0, and R2 cannot ping R1. What action will fix the issue?
- A. Replace the SFP module because it is not supported.
- B. Correct the IP SLA probe that failed.
- C. Fix route dampening configured on the router.
- D. Fix IP Event Dampening configured on the interface.
Answer: D
Explanation:
NEW QUESTION # 70
Drag and drop the MPLS concepts from the left onto the descriptions on the right.
Answer:
Explanation:
NEW QUESTION # 71
Refer to the exhibit.
An engineer configures DMVPN and receives the hub location prefix of 10.1.1.0724 on R2 and R3 The R3 prefix of 10 1.3.0/24 is not received on R2. and the R2 prefix 10.1,2.0/24 is not received on R3. Which action reserves the issue?
- A. Split horizon prevents the routes from being advertised between spoke routers it should be disabled with the no ip split-horizon eigrp 10 command on the Gi0/0 interface of R1.
- B. There is no spoke-to-spoke connection DMVPN configuration should be modified with a manual neighbor relationship configured between R2 and R3 and confirmed bb use of the show ip eigrp neighbor command.
- C. Split horizon prevents the routes from being advertised between spoke routers it should be disabled with the command no ip split-horizon eigrp 10 on the tunnel interface of R1
- D. There is no spoke-to-spoke connection DMVPN configuration should be modified to enable a tunnel connection between R2 and R3 and neighbor relationship confirmed by use of the show ip eigrp neighbor command
Answer: C
Explanation:
Explanation
In this topology, the Hub router will receive advertisements from R2 Spoke router on its tunnel interface. The problem here is that it also has a connection with R3 Spoke on that same tunnel interface. If we don't disable split-horizon, then the Hub will not relay routes from R2 to R3 and the other way around. That is because it received those routes on the same interface tunnel and therefore it cannot advertise back out that same interface (split-horizon rule). Therefore we must disable splithorizon on the Hub router to make sure the Spokes know about each other.
NEW QUESTION # 72
Which IGPs are supported by the MPLS LDP autoconfiguration feature?
- A. OSPF and ISIS
- B. ISIS and RIPv2
- C. OSPF and EIGRP
- D. RIPv2 and OSPF
Answer: A
Explanation:
NEW QUESTION # 73
Drag and drop the MPLS VPN concepts from the left onto the correct descriptions on the right.
Answer:
Explanation:
Reference:
https://www.rogerperkin.co.uk/featured/route-distinguisher-vs-route-target/
NEW QUESTION # 74
Drag and Drop the IPv6 First-Hop Security features from the left onto the definitions on the right.
Answer:
Explanation:
NEW QUESTION # 75
......
Cisco 300-410 Dumps Cover Real Exam Questions: https://www.dumpsvalid.com/300-410-still-valid-exam.html
Dumps Collection 300-410 Test Engine Dumps Training With 563 Questions: https://drive.google.com/open?id=1hP4PuChDrs9mpiJACl58jZOwEbpkbF3w