[Nov-2024] Verified DC0-200 dumps Q&As - DC0-200 dumps with Correct Answers
The Best Dell Certification Study Guide for the DC0-200 Exam
DC0-200 Exam topics
Candidates must know the exam topics before they start of preparation. Because it will really help them in hitting the core. Our DC0-200 exam dumps will include the following topics:
- Configure 33%
- Troubleshoot 22%
- Install 29%
- Maintain 16%
Dell DC0-200 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
NEW QUESTION # 70
If there is a loss of power redundancy on your PowerEdge server, in which three ways can Dell OpenManage IT Assistant report this? (Choose three.)
- A. The status panel for that system indicates which power supply failed.
- B. Systems Status is marked as "Warning" in OpenManage IT Assistant.
- C. Dell IT Assistant sends an alert to Dell OpenManage Server Administrator.
- D. An SNMP trap can be logged in the OpenManage IT Assistant.
Answer: A,B,D
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 71
Which two are provided by riser boards? (Choose two.)
- A. a place to connect up to 16 DIMMs in 4U and larger systems
- B. PCI slots parallel to the system board in 1U and 2U systems
- C. redundant power conditioning and distribution for power redundant systems
- D. processor mounting parallel to the system board in 2U, quad processor systems
Answer: A,B
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 72
You have the PowerEdge server running Red Hat Linux Advanced Server Operating System. You want to be able to accomplish the following: -- report health of all system components -- change System Reset Timer value under the Auto Recovery tab -- save Command Log under the Logs tab -- set the Beep Speaker on the Server Alert Action under Alert Management tab -- view details in About box Which two access privileges allow you to accomplish these tasks? (Choose two.)
- A. administrator user
- B. root user
- C. any valid user with root privileges
- D. any valid user
Answer: B,C
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 73
What are three types of NIC teaming? (Choose three.)
- A. Load Balancing
- B. Generic Trunking
- C. Cluster Teaming
- D. Fault Tolerance
Answer: A,B,D
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 74
If the server is operating normally, the Remote Access Controller allows an administrator to do which two tasks? (Choose two.)
- A. display storage information in a graphical environment
- B. perform an orderly shutdown of the server
- C. create a utility partition
- D. manage the server by redirecting the console output to a remote console
Answer: B,D
NEW QUESTION # 75
The system administrator of a mixed network environment consisting of both Microsoft Windows 2000 and Red Hat Linux wants to take advantage of the embedded NICs on the PowerEdge 2650 servers for network load balancing. Which scenario would work?
- A. configure Windows 2000 servers to use IP and Linux servers to use IP
- B. configure Windows 2000 servers to use IPX and Linux servers to use IP
- C. configure Windows 2000 servers to use IP and IPX and Linux servers to use IP and IPX
- D. You cannot configure network load balancing in multiple Network Operating Systems.
Answer: A
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 76
You can use OMSA to remotely update the firmware for which two components? (Choose two.)
- A. Remote Access Controller firmware
- B. host bus adapter firmware
- C. system software
- D. BIOS
Answer: A,D
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 77
You are monitoring 100 servers in your environment using ITA. You want to determine which servers are equipped with a remote access controller and the Array Manager agent, as well as view the physical memory of each server on one screen. How should you view this information from ITA?
- A. go to the ITA Logs tab, select the information you want to view, and click the Refresh button
- B. go to the ITA Inventory view, select the information you want to view, and click the Get Inventory button
- C. go to the ITA Remote Address Book, select the information you want to view, and click the Get Addresses button
- D. go to the ITA Search view, select all the information you want to view using one query, and click the Search button
Answer: B
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 78
What should you do before removing or reseating the RAID memory?
- A. remove the hard drives
- B. disconnect the RAID key
- C. disconnect the RAID battery
- D. disconnect the RAID cable
Answer: C
NEW QUESTION # 79
What is the PCI slot color coding scheme for Dell PowerEdge servers?
- A. 33 MHz slots are orange; 66 MHz slots are blue.
- B. 33 MHz slots are cream-colored, 66 MHz slots are green.
- C. 33 MHz slots are green; 66 MHz slots are cream-colored.
- D. 33 MHz slots are blue; 66 MHz slots are green.
Answer: B
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 80
You have the PowerEdge server running Red Hat Linux Advanced Server Operating System. You want to be able to accomplish the following: -- report health of all system components -- change System Reset Timer value under the Auto Recovery tab -- save Command Log under the Logs tab -- set the Beep Speaker on the Server Alert Action under Alert Management tab -- view details in About box Which two access privileges allow you to accomplish these tasks? (Choose two.)
- A. administrator user
- B. root user
- C. any valid user with root privileges
- D. any valid user
Answer: B,C
NEW QUESTION # 81
A disk in a RAID 5 array has failed. Using Array Manager, which statement is true about rebuilding the data onto a replacement drive if a PERC 3/DC is in use?
- A. The replacement disk must be initialized before insertion.
- B. The replacement disk must be initialized after insertion.
- C. The rebuild operation will start automatically upon insertion of the replacement disk.
- D. The rebuild operation will start only after it is manually initiated.
Answer: C
NEW QUESTION # 82
What is the correct NIC teaming for the Intel Proprietary Method to accomplish load balancing?
- A. ATF
- B. ALB
- C. SLB
- D. AFT
Answer: B
NEW QUESTION # 83
You are configuring a new PowerEdge 2650 that is running Windows 2000 Server. The system will be in a rack without a keyboard or monitor connected, so you want to turn off keyboard error messages. What should you do?
- A. rack the system, as the system will autodetect rack use and disable keyboard error reporting
- B. disable the PS/2 port in Windows 2000 Device Manager and reboot
- C. boot to the Utility Partition, execute nokb.com before rebooting
- D. select the Do Not Report option for the Report Keyboard Errors field in the System Setup Utility
Answer: D
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 84
Why is memory interleaving used?
- A. to provide redundancy by allowing defective memory to be disabled
- B. to provide speed improvements by accessing memory in parallel
- C. to provide redundancy by maintaining parity information on the DRAM to detect and correct single bit errors
- D. to provide speed improvements by allowing addressing to be set for the next access to the same DIMM, while data are being read from the previous access
Answer: B
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 85
What are three ways you can flash the BIOS on a PowerEdge server? (Choose three.)
- A. using OMSA
- B. using ITA
- C. using Device Manager
- D. using a floppy diskette
- E. using DSA
Answer: A,B,D
NEW QUESTION # 86
Why is memory interleaving used?
- A. to provide redundancy by allowing defective memory to be disabled
- B. to provide speed improvements by accessing memory in parallel
- C. to provide redundancy by maintaining parity information on the DRAM to detect and correct single bit errors
- D. to provide speed improvements by allowing addressing to be set for the next access to the same DIMM, while data are being read from the previous access
Answer: B
NEW QUESTION # 87
Where in the Dell Server Assistant (DSA) interface can you erase all hard disks in preparation for a manual installation of a new OS?
- A. Setup Wizard
- B. Drive Utility
- C. Server Setup
- D. System Tools
Answer: D
NEW QUESTION # 88
You want to install Windows 2000 Server and Dell-validated drivers for your factory-installed devices using the Dell Server Assistant CD. From which location should you launch the Dell Server Assistant?
- A. boot to the Dell Server Assistant CD after installing Windows 2000
- B. use the Dell Server Assistant to create a Utility Partition and launch the installation from the Utility Partition
- C. boot to the Dell Server Assistant CD and have your Windows CD available
- D. autorun the CD from the Windows desktop after installing Windows 2000
Answer: C
NEW QUESTION # 89
What is the PCI slot color coding scheme for Dell PowerEdge servers?
- A. 33 MHz slots are orange; 66 MHz slots are blue.
- B. 33 MHz slots are cream-colored, 66 MHz slots are green.
- C. 33 MHz slots are green; 66 MHz slots are cream-colored.
- D. 33 MHz slots are blue; 66 MHz slots are green.
Answer: B
NEW QUESTION # 90
Which statement is true about using the Save feature of BASP?
- A. It is used to install and configure the Broadcom Ethernet Controller driver.
- B. It saves a configuration as an executable file.
- C. It lets you transfer teaming configurations to other servers.
- D. It is only available in Windows 2000.
Answer: C
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 91
What does virtual disk refer to, as used in Dell Array Manager?
- A. array disks or array disk segments presented to the OS as a single continuous block of storage space
- B. contains the physical view of storage entities such as controllers, channels, and array disks
- C. a single array disk in an array of disks
- D. a block of storage accessed by a drive letter
Answer: A
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION # 92
......
Dell Certified Server Professional DC0-200 Exam
Dell Certified Server Professional DC0-200 Exam is related to Dell Certified Server Professional Certification. This DC0-200 exam validates expert level skills of candidates to install, configure, maintain and troubleshoot Dell EMC PowerEdge Server products. Dell Certified Server Professionals and Dell EMC Certified Associates usually hold or pursue this certification and you can expect the same job roles after completion of this certification.
DC0-200 certification guide Q&A from Training Expert DumpsValid: https://www.dumpsvalid.com/DC0-200-still-valid-exam.html