Maximum Grades By Making ready With NSE5_FMG-7.2 Dumps UPDATED 2024
Prepare NSE5_FMG-7.2 Exam Questions [2024] Recently Updated Questions
Fortinet NSE5_FMG-7.2 exam is an essential certification for IT professionals seeking to enhance their skills in managing and configuring FortiManager 7.2. Fortinet NSE 5 - FortiManager 7.2 certification validates the candidate's knowledge and skills in a range of areas, including device management, policy management, and troubleshooting. Candidates can prepare for the exam using a range of study resources, including official Fortinet training courses, study guides, and practice exams, and can benefit from the certification's global recognition and industry respect.
NEW QUESTION # 53
Refer to the exhibit.
You are using theQuick Installoption to install configuration changes on the managed FortiGate.
Which two statements correctly describe the result? (Choose two.)
- A. It will not create a new revision in the revision history
- B. It cannot be canceled once initiated and changes will be installed on the managed device
- C. It provides the option to preview configuration changes prior to installing them
- D. It installs device-level changes to FortiGate without launching theInstall Wizard
Answer: B,D
Explanation:
FortiManager_6.4_Study_Guide-Online - page 164
The Install Config option allows you to perform a quick installation of device-level settings without launching the Install Wizard. When you use this option, you cannot preview the changes prior to committing.
Administrator should be certain of the changes before using this install option, because the install can't be cancelled after the process is initiated.
NEW QUESTION # 54
An administrator has assigned a global policy package to custom ADOM1. Then the administrator creates a new policy package Fortinet in the custom ADOM1. What will happen to the Fortinet policy package when it is created?
- A. You can select the option to assign the global polices
- B. You need to assign the global policy package from the global ADOM
- C. it automatically assigns the global policies
- D. You need to reapply the global poky package to the ADOM
Answer: C
NEW QUESTION # 55
View the following exhibit:
An administrator used the value shown in the exhibit when importing a Local-FortiGate into FortiManager.
What name will be used to display the firewall policy for port1?
- A. WAN zone on FortiGate and WAN interface on FortiManager
- B. port1 on both FortiGate and FortiManager
- C. port1 on FortiGate and WAN on FortiManager
- D. WAN zone on FortiGate and WAN zone on FortiManager
Answer: C
NEW QUESTION # 56
View the following exhibit.
Which statement is true regarding this failed installation log?
- A. Policy ID 2 is installed without a source device
- B. Policy ID 2 is installed without a source address
- C. Policy ID 2 will not be installed
- D. Policy ID 2 is installed in disabled state
Answer: C
NEW QUESTION # 57
An administrator is replacing a failed device on FortiManager by running the following command:
execute device replace sn <devname> <serialnum>.
Which device name and serial number must the administrator use?
- A. The device name and serial number of the failed device
- B. The device name and serial number of the new device
- C. The device name of the new device and serial number of the failed device
- D. The device name of the failed device and serial number of the new device
Answer: D
NEW QUESTION # 58
View the following exhibit:
How will FortiManager try to get updates for antivirus and IPS?
- A. From the configured override server list only
- B. From public FDNI server with highest index number only
- C. From the default serverfdsl.fortinet.com
- D. From the list of configured override servers with ability to fall back to public FDN servers
Answer: D
Explanation:
Reference:https://community.fortinet.com/t5/Fortinet-Forum/Clarification-of-FortiManager-s-quot-Server-Overr
NEW QUESTION # 59
Refer to the exhibit.
An administrator has configured the command shown in the exhibit on FortiManager. A configuration change has been installed from FortiManager to the managed FortiGate that causes the FGFM tunnel to go down for more than 15 minutes.
What is the purpose of this command?
- A. It allows FortiGate to reboot and recover the previous configuration from its configuration file.
- B. It allows FortiGate to reboot and restore a previously working firmware image.
- C. It allows FortiGate to unset central management settings.
- D. It allows the FortiManager to revert and install a previous configuration revision on the managed FortiGate.
Answer: A
Explanation:
Reference:https://docs.fortinet.com/document/fortimanager/6.2.0/fortigate-fortimanager-communicationsprotoco
NEW QUESTION # 60
An administrator's PC crashes before the administrator can submit a workflow session for approval. After the PC is restarted, the administrator notices that the ADOM was locked from the session before the crash.
How can the administrator unlock the ADOM?
- A. Delete the previous admin session manually through the FortiManager GUI or CLI.
- B. Log in asSuper_Userin order to unlock the ADOM.
- C. Restore the configuration from a previous backup.
- D. Log in using the same administrator account to unlock the ADOM.
Answer: A
NEW QUESTION # 61
An administrator run the reload failure command:diagnose test deploymanager reload config
<deviceid>on FortiManager. What does this command do?
- A. It compares and provides differences in configuration on FortiManager with the current running configuration of the specified FortiGate.
- B. It installs the provisioning template configuration on the specified FortiGate.
- C. It downloads the latest configuration from the specified FortiGate and performs a reload operation on the device database.
- D. It installs the latest configuration on the specified FortiGate and update the revision history database.
Answer: C
Explanation:
Reference:https://community.fortinet.com/t5/FortiManager/Technical-Note-Retrieve-configuration-file-using-CL
NEW QUESTION # 62
What does a policy package status ofModifiedindicate?
- A. The Policy package configuration has been changed on FortiManager and changes have not yet been installed on the managed device.
- B. The Policy configuration has been changed on a managed device and changes have not yet been imported into FortiManager
- C. The policy package was never imported after a device was registered on FortiManager
- D. FortiManager is unable to determine the policy package status
Answer: C
NEW QUESTION # 63
What does a policy package status ofConflictindicate?
- A. The policy package does not have a FortiGate as the installation target.
- B. The policy package configuration has been changed on both FortiManager and the managed device independently.
- C. The policy package reports inconsistencies and conflicts during aPolicy Consistency Check.
- D. The policy configuration has never been imported after a device was registered on FortiManager.
Answer: B
NEW QUESTION # 64
Refer to the exhibit.
An administrator would like to create three ADOMs on FortiManager with different access levels based on departments.
What two conclusions can you draw from the design shown in the exhibit? (Choose two.)
- A. Admin A can access VDOM2 and VDOM3 with the super user profile.
- B. The FortiManager policies and objects database can be shared between the Financial and HR ADOMs.
- C. The administrator must set the FortiManager ADOM mode to Advanced.
- D. The administrator must configure FortiManager in workspace mode.
Answer: B,C
NEW QUESTION # 65
Which of the following statements are true regarding VPN Gateway configuration in VPN Manager? (Choose two.)
- A. Managed gateways are devices managed by FortiManager in the same ADOM
- B. Managed devices in other ADOMs must be treated as external gateways
- C. Protected subnets are the subnets behind the device that you don't want to allow access to over the IPsec VPN
- D. External gateways are third-party VPN gateway devices only
Answer: A,B
Explanation:
Reference:http://help.fortinet.com/fmgr/50hlp/56/5-6-1/FMG-FAZ/1
300_VPN_Manager/0800_IPsec_VPN_Gateway/0400_Create_mngd_gateway.htm
NEW QUESTION # 66
Refer to the exhibit.
Which two statements are true if the script is executed using theDevice Databaseoption? (Choose two.)
- A. The successful execution of a script on theDevice Databasewill create a new revision history
- B. You must install these changes using theInstall Wizardto a managed device
- C. TheDevice Settings Statuswill be tagged asModified
- D. The script history will show successful installation of the script on the remote FortiGate
Answer: B,C
NEW QUESTION # 67
Which of the following statements are true regarding reverting to previous revision version from the revision history? (Choose two.)
- A. Reverting to a previous revision history will tag the device settings status asAuto-Update.
- B. Reverting to a previous revision history will generate a new versionIDand remove all other history versions.
- C. To push these changes to a managed device, it required an install operation to the managed FortiGate.
- D. It will modify device-level database
Answer: C,D
NEW QUESTION # 68
What is the purpose of thePolicy Checkfeature on FortiManager?
- A. To find and delete disabled firewall policies in the policy package
- B. To find and provide recommendation for optimizing policies in a policy package
- C. To find and merge duplicate policies in the policy package
- D. To find and provide recommendation to combine multiple separate policy packages into one common policy package
Answer: B
Explanation:
Reference:https://help.fortinet.com/fmgr/50hlp/56/5-6-2/FortiManager_Admin_Guide/1200_Policy%20and%20O
NEW QUESTION # 69
Refer to the exhibit.
You ate using the Quick install option to install configuration changes on the managed FortiGate Which two statements correctly describe the result? (Choose two)
- A. It provides the option to preview only the policy package changes before installing them
- B. It installs all the changes in the device database first and the administrator must reinstall the changes on the FodiGate device
- C. It installs device-level changes on the FortiGate device without launching the Install Wizard
- D. It install provisioning template changes on the FortiGate device
Answer: C,D
NEW QUESTION # 70
View the following exhibit.
Which one of the following statements is true regarding the object named ALL?
- A. FortiManager created the object ALL as a unique entity in its database, which can be only used by this managed FortiGate.
- B. FortiManager updated the object ALL using FortiManager's value in its database
- C. FortiManager updated the object ALL using FortiGate's value in its database
- D. FortiManager installed the object ALL with the updated value.
Answer: C
NEW QUESTION # 71
Which three settings are the factory default settings on FortiManager? (Choose three.)
- A. FortiAnalvzer features are disabled.
- B. The FortiManager setup wizard is disabled.
- C. The Port1 interface IP address is 192.168.1.99/24.
- D. The administrative domain is disabled.
- E. Management Extension applications are enabled.
Answer: A,C,D
NEW QUESTION # 72
......
To take the NSE5_FMG-7.2 exam, candidates should possess a solid understanding of network security concepts and have experience working with Fortinet’s security solutions. NSE5_FMG-7.2 exam covers a range of topics, including FortiManager installation and configuration, policy and object management, device and network management, and troubleshooting. Successful completion of the exam demonstrates that the candidate has a deep understanding of FortiManager and is qualified to manage and administer it effectively in a production environment.
To take the Fortinet NSE5_FMG-7.2 certification exam, IT professionals must have experience working with FortiManager 7.2. They must also have a solid understanding of network security concepts and technologies. Additionally, it is recommended that candidates have completed the Fortinet NSE 4 certification program or have equivalent experience. Fortinet NSE 5 - FortiManager 7.2 certification exam is a proctored exam that consists of 60 multiple-choice questions that must be completed within 120 minutes.
Give push to your success with NSE5_FMG-7.2 exam questions: https://www.dumpsvalid.com/NSE5_FMG-7.2-still-valid-exam.html
NSE5_FMG-7.2 100% Guarantee Download NSE5_FMG-7.2 Exam PDF Q&A: https://drive.google.com/open?id=1fKbsbvRqI5NqzKI2zsnwdO9XFcFoYMqG