Get 100% Success with Latest CCNP Collaboration 300-815 Exam Dumps Mar 01, 2024
The Best 300-815 Exam Study Material and Preparation Test Question Dumps
NEW QUESTION # 34
When you troubleshoot H.323 call setup, which message informs you that the called party is being notified about the call?
- A. PROCEEDING
- B. CONNECT
- C. RINGING
- D. ALERTING
Answer: B
NEW QUESTION # 35
You see the voice register pool 1 command in your Cisco Unified Communications Manager Express configuration. Which configuration is occurring in this section?
- A. configuration for a single SIP phone
- B. configuration for SIP registrar service
- C. configuration items common for all SIP phones
- D. configuration for a pool of SIP phones (similar to device pool on Cisco Unified Communications Manager)
Answer: D
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cusrst/admin/sccp_sip_srst/configuration/ guide/SCCP_and_SIP_SRST_Admin_Guide/srst_setting_up_using_sip.html
NEW QUESTION # 36
Which IOS command creates a SIP-enabled dial peer?
- A. dial-peer voice 20 pots
- B. dial peer voice 20 sip
- C. dial-peer voice 20 voip
- D. voice dial-peer 20 sip
Answer: C
Explanation:
Section: Cisco Unified Border Element
Explanation/Reference: https://www.ciscopress.com/articles/article.asp?p=664148&seqNum=6
NEW QUESTION # 37
When locations-based Call Admission Control denies the call, which two masks can AAR apply when routing the call through the PSTN? (Choose two.)
- A. external phone number mask
- B. +E.164 alternate number mask
- C. called party transform mask
- D. enterrise alternate number mask
- E. AAR destination mask
Answer: A,E
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/srnd/collab10/collab10/dialplan.html
NEW QUESTION # 38
Which action is correct with respect to toll fraud prevention configuration in the Cisco Unified Communications Manager Express?
- A. Configure the command no ip address trusted authenticate under "voice service voip".
- B. Configure Direct Inward Dial for Incoming ISDN Calls with overlap dialing.
- C. Configure IP Address Trusted Authentication for Incoming VoIP Calls.
- D. Enable Secondary Dial tone on Analog and Digital FXO Ports.
Answer: C
NEW QUESTION # 39
Which call pickup feature allows users to pick up incoming calls in a group that is associated with their own group?
- A. Directed Call Pickup
- B. Other Group Pickup
- C. BLF Call Pickup
- D. Group Call Pickup
Answer: B
NEW QUESTION # 40
Cisco SIP IP telephony is implemented on two floors of your company. Afterward, users report intermittent voice issues in calls established between floors. All calls are established, and sometimes they work well, but sometimes there is one-way audio or no audio. You determine that there is a firewall between the floors, and the administrator reports that it is allowing SIP signaling and UDP ports from 20000 to 22000 bidirectionally.
What are two possible solutions? (Choose two.)
- A. Ask the firewall administrator to change the ports to TCP.
- B. Go to System Parameters in Cisco Unified Communications Manager and change the range of media ports to 20000-22000.
- C. Go to the SIP profile assigned to these IP phones in Cisco Unified CM and change the range of media ports to 16384-32767
- D. Ask the firewall administrator to change the range of UDP ports to 16384-32767.
- E. Go to the SIP profile assigned to these IP phones in Cisco Unified CM and change the range of media ports to 20000-22000.
Answer: C,D
Explanation:
Section: Signaling and Media Protocols
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/port/9_1_1/ CUCM_BK_T2CA6EDE_00_tcp-port-usage-guide-91/CUCM_BK_T2CA6EDE_00_tcp-port-usage-guide-
91_chapter_01.html
NEW QUESTION # 41
Drag and drop the commands from the bottom to the blanks in the code to implement a translation rule to allow only 11 digits to be received over a SIP trunk to a SIP provider. The Cisco UCM is currently sending calls to the Cisco Unified Border Element in E.
164 format. Not all options are used.
Answer:
Explanation:
NEW QUESTION # 42
Refer to the exhibit.
Users report that when they dial the emergency number 9911 from any internal phone, it takes a long time to connect with the emergency operator. Which action resolves this issue?
- A. Point the emergency pattern directly to the PSTN gateway.
- B. Check the Urgent Priority check box under 9.911 pattern.
- C. Adjust the service parameter T204 timer to the desired value.
- D. Adjust the service parameter T302 timet to the desired value.
Answer: B
NEW QUESTION # 43
Refer to the exhibit.
An administrator is troubleshooting a situation where a call placed from a phone registered to Cisco Unified Communications Manager does not complete. The administrator wants to use the Dialed Number Analyzer on Cisco Unified CM to check which translation pattern the call is matching. However, when logging in to Cisco Unified Serviceability there is no option for Dialed Number Analyzer under the tool menu. Which two steps must be performed to resolve this issue? (Choose two.)
- A. Activate the Cisco CallManager service.
- B. Activate the Cisco Dialed Number Analyzer service.
- C. Activate the Cisco Dialed Number Analyzer Server service.
- D. Activate the Cisco Extended Functions service.
- E. Restart the subscriber
Answer: B,C
NEW QUESTION # 44
Signal number reach call phone that not answered are leaving voicemails on the cell phone rather the corporate mailbox. Which two options will resolve this issue? (Choose two.)
- A. Decrease the T301 timer Decrease the Answer Too Late timer
- B. Check the Enable Extend and Connect checkbox
- C. Check the Enable Unified Mobility features checkbox
- D. Decrease the T302 timer
Answer: A,C
NEW QUESTION # 45
A company has users that are logged in to hunt groups. However, there is a requirement for hunt group configurations to provide an option to turn on audible ringtones when calls to a line group arrive at a phone that is logged out and on a break. This ringtone alerts a logged-out user that there is an incoming call to a hunt list to which the line is a member, but the call does not ring at the phone of that line group member because of the logged-out status. Which action meets this requirement?
- A. Set the service parameter Enterprise Feature Access number for hunt group logout and set up an access number
- B. Configure the service parameter hunt group logoff notification and specify the name of the ringtone file.
- C. Configure the HLog softkey on the phone so that while a user is logged off, it plays an audible tone when a call is missed.
- D. Set the service parameter Party Entrance Tone to True."
Answer: B
NEW QUESTION # 46
A user in location X dials an extension at location Y.
The call travels through a QoS-enabled WAN network, but the user experiences choppy or clipped audio. What is the cause of this issue?
- A. ptime mismatch
- B. phone class of service issue
- C. codec mismatch
- D. missing Call Admission Control
Answer: D
NEW QUESTION # 47
In Cisco Unified Communications Manager globalized call routing is implemented and must confirm that it is correctly implemented without making a call. Which tool do you use for verification?
- A. Real-Time Monitoring Tool
- B. Dialed Number Analyzer
- C. SDI trace
- D. SDL trace
Answer: B
Explanation:
Section: Call Control and Dial Planning
NEW QUESTION # 48
CollabCorp is a global company with two clusters, emea.collab corp and apac.collab.corp. URI dialing is implemented and working in each cluster. The company configured routing between clusters to make inter-cluster calls via URI. but this is not working as expected. Which two configuration elements should be checked to resolve this issue? (Choose two.)
- A. SIP route pattern
- B. directory URI partition
- C. calling search space and partition
- D. SIP trunk
- E. intercluster trunk
Answer: A,D
NEW QUESTION # 49
The Cisco Unified Communications Manager Dialed Number Analyzer allows analysis of calls from which two devices? (Choose two.)
- A. CTI ports
- B. CTI route points
- C. translation patterns
- D. device pools
- E. IP phones
Answer: A,E
Explanation:
Section: Call Control and Dial Planning
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/dna/11_5_1/ CUCM_BK_CBA47A6E_00_cucm-dna-guide-115/CUCM_BK_CBA47A6E_00_cucm-dna-guide-
115_chapter_01.html#CUCM_TP_A5DA99E0_00
NEW QUESTION # 50
An engineer is configuring a call park feature in Cisco Unified Communications Manager Express. Which command does the engineer use to ensure that the call is reverted to the user after 60 seconds?
- A. R2(config-ephone-dn)#park-slot timeout 60 limit 2 recall alternate 3002
- B. R2(config-ephone-dn)#park reservation-group 1
- C. R2(config-ephone-dn)#park-slot timeout 30 limit 2 recall alternate 3002
- D. R2(config-ephone-dn)#park reservation-group 60
Answer: C
NEW QUESTION # 51
When configuring hunt groups, where do you add the individual directory numbers that will be part of the group?
- A. hunt pilot
- B. hunt list
- C. line group
- D. route group
Answer: C
Explanation:
Section: Cisco Unified CM Call Control Features
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/12_0_1/systemConfig/ cucm_b_system-configuration-guide-1201/cucm_b_system-configuration-guide-1201_chapter_010101.html
NEW QUESTION # 52
......
Get Ready to Pass the 300-815 exam Right Now Using Our CCNP Collaboration Exam Package: https://www.dumpsvalid.com/300-815-still-valid-exam.html
Enhance Your Career With Available Preparation Guide for 300-815 Exam: https://drive.google.com/open?id=12GyawqVrEu3Wq7vPUem_s_uuqL4o4BzZ