[Feb 10, 2022] Pass Your OmniStudio-Developer Dumps Free Latest Salesforce Practice Tests
Get Top-Rated Salesforce OmniStudio-Developer Exam Dumps Now
Salesforce OmniStudio-Developer Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
NEW QUESTION 18
A developer needs to configure a DataRaptor to retrieve data from a single object. The structure of the output data does not need to be changed.
Following best practices, which type of DataRaptor should the developer use?
- A. DataRaptor Extract
- B. DataRaptor Load
- C. DataRaptor Turbo Extract
- D. DataRaptor Transform
Answer: C
NEW QUESTION 19
Refer to the exhibit.
All inputs to the Calculation Matric are set correctly.
The Calculation Matrix has the following input:
What is the output?
- A. 12.99,13.99
- B. 12.99
- C. 13.99
- D. Null
Answer: B
NEW QUESTION 20
An OmniScript updates data from one Salesforce record, but when it completes, only some of the data is updated in Salesforce. A DataRaptor Load saves the dat a. What error could cause this behavior?
Choose 2 answers
- A. The fields that are not updated are read only in Salesforce.
- B. ContextId is misspelled in the merge code that passes the Recordld to the DataRaptor
- C. In the DataRaptor Load, in the Preview tab, the Record is from the wrong record type.
- D. The input JSON paths In the DataRaptor Load do not match the JSON from the OmniScript.
Answer: A,D
NEW QUESTION 21
In a Calculation Procedure, what is required for the output of a Calculation Step to be used in an Aggregation Step?
- A. It must be included in constants
- B. |t must be a calculation step
- C. It must be included in the calculation output
- D. It must be a matrix lookup step
Answer: B
NEW QUESTION 22
What is the merge code you need for this Integration Procedure structure to pass a CaseNumber node from the DataRaptor Extract Action Single Book (DRReadCase) to the HTTP Action's HTTP Path URL?
- A. HTTPGetCaseDetails: CaseNumber
- B. {{DRReadCase. CaseNumber}}
- C. {{CaseNumben}
- D. %DRReadCase:CaseNumber%
Answer: D
NEW QUESTION 23
Why do you need a Response Action element in an Integration Procedure?
- A. It returns data to whatever called the Integration Procedure.
- B. It controls where the user navigates after the Integration Procedure is completed.
- C. It enforces error checking.
- D. It calls an APEX class and method.
Answer: A
NEW QUESTION 24
You are importing a list of new products into Salesforce and need to map the new product to the appropriate PriceBook Entries.
What typeof DataRator mapping keeps tractof the new product Records as they are created to use in the Price entries you need to create?
- A. Lookup Mapping
- B. Linked Mapping
- C. Lookup Key
- D. Relationship Query
Answer: B
NEW QUESTION 25
A developer is creating a FlexCard and needs to display additional information using a Flyout.
Which two types of components can the developer embed m the flyout?
Choose 2 answer
- A. An OmniScript
- B. A Child FlexCard
- C. A DataRaptor
- D. An Integration Procedure
Answer: B,D
NEW QUESTION 26
A developer configure a Flexcard with a DataRaptor data source that uses the params.id as an. When the developer clicks Views Data on the FlexCard, valid data displays. However, when the developer previews the layout, the FlexCard does not display. What could cause this error?
Choose 2 answers
- A. The RecordId in the Test Data Source settings ins for the wrong record type.
- B. The attribute haven't been configured to pass the data to the fields.
- C. There is not Salesforce record for the FlexCard based on the RecordId in the layout's Test Data Source Settings.
- D. The Data Node field for the FlexCard is empty.
Answer: A,B
NEW QUESTION 27
A developer needs to transform contact data into a JSON array.
Given the input JSON shown above, what are two ways a developer could configure a DATARaptor transform to achieve theexpected Output JSON? Choose 2 answers
- A. Set the Input JSON path as List(Contact) and the OutputJSON Path as Contact.
- B. Use a formula LIST(Contact), and add the output of the formula as the input in the Transform tab.
- C. Set the Input JSON Path as Contact the out JSON Path as contact and output Data type as List.
- D. Set the input JSON Path as Contact and the OutPut JSON Path as List (Contact)
Answer: A,C
NEW QUESTION 28
You want a child FlexCard to use the parent's data source.
What do you need to do to make it work? Choose 2 answers
- A. You must select a data node in the Data Node field in the Properties panel on the child FlexCard Pencil & Pape
- B. The same data source must be selected and configured in both parent and child FlexCards
- C. The same fields must be available in both parent and child FlexCards
- D. You must select a data node in the Data Node field in the Properties panel on the parent FlexCard
Answer: A,D
NEW QUESTION 29
A developer needs to build a multi-step intake form. Each step must allow the user to cancel the intake at any time. The developer is using an LWC OmniScript to build the form.
How should the developer implement the cancel functionality for all steps using the LWC OmniScript Designer?
- A. Add a navigation Action inside each step and set the Component name to ''Cancel'',
- B. Add a navigation Action outside each step and set the Element Name to ''Cancel'',
- C. Add a navigation Action inside each step and set the Element Name to ''Cancel'',
- D. Check the Enable Cancel checkbox in the Setup tab under Cancel Options.
Answer: D
NEW QUESTION 30
You configured a FlexCard with a DataRaptor data source which uses the params.id as an input. When you click View Data on the FlexCard, valid data displays. However, when you preview the layout, the FlexCard does not display.
What could cause this error? Choose 2 answers
- A. The Recordid in the Test Data Source Settings is for the wrong record type.
- B. The Attributes haven't been configured to pass the data to the fields.
- C. There is no Salesforce record for the FlexCard based on the Recordid in the layout's Test Data Source Settings.
- D. The Data Node field for the FlexCard is empty.
Answer: A,C
NEW QUESTION 31
A developer needs to build a multi-step intakeform. Each step must allow the user to cancel the intake at any time. The developer is using an LWC OmniScript to build the form.
How should the developer implement the cancel functionality for all steps using the LWC OmniScript Designer?
- A. Add a navigation Action inside each step and set the Component name to ''Cancel'',
- B. Add a navigation Action outside each step and set the Element Name to ''Cancel'',
- C. Check the Enable Cancel checkbox in the Setup tab under Cancel Options.
- D. Add a navigation Actioninside each step and set the Element Name to ''Cancel'',
Answer: C
NEW QUESTION 32
Refer to the exhibit.
All inputs to the Calculation Matric are set correctly.
The Calculation Matrix has the following input:
What is the output?
- A. 12.99,13.99
- B. 12.99
- C. 13.99
- D. Null
Answer: B
NEW QUESTION 33
A developer creates a Flexcard that displays a contact's mailing address and passes the contact's postal code to a child FlexCard.
When configuration text elements in the child FlexCard, what syntax should a developer use to refer to the contact's postal code?
- A. {Params.postalcode}
- B. {Postalcode}
- C. {Records.postalcode}
- D. {Parent.postalcode}
Answer: A
NEW QUESTION 34
A developer needs to change some field labels on a FlexCard. The FlexCard is currently deployed to production. The developer that the best course of action is to version the FlexCard rather than cloning it.
Which factor would lead the developer to this decision?
- A. All instance of the FlexCard must be updated with the changes.
- B. Another team member is developing new action, fields and styling for the current version of the FlexCard.
- C. The new and current versions will be displayed together on the same target.
- D. The new version of the FlexCard will be used in a new Console, and the current version of the FlexCard should remain unchanged.
Answer: B
NEW QUESTION 35
Refer to the following row-versioned calculation matrix.
The developer needs to delete the row that contains the Code CA-SF.
If the developer deletes that row in Version 3, what is the result?
- A. The row is deleted In Versions 2 and 3 but will remain in Version 1.
- B. The row is deleted in Version 3 and Version 1.
- C. The row is deleted in all versions
- D. The row is delete only in Version 3.
Answer: D
NEW QUESTION 36
You have configured an Integration Procedure element with SEND/RESPONSE TRANSFORMATIONS as shown.
Alternatively, how would you configure Additional Input to send exactly the same data? Assume that you check Send Only Additional Input.
A)
B)
C)
D)
- A. OptionA
- B. OptionD
- C. OptionC
- D. OptionB
Answer: B
NEW QUESTION 37
Refer to the exhibit.
A developer creates an OmniScript display FirstName, LastName, and BirthDate of a contact using a Type Ahead Block. The DataRaptor used in the Type Ahead has been tested and fetches the correct data.
When previewing Omniscript, the developer enters a name in the Type Ahead and males a selection of a contact from the list. However, the text fields FirstName. LastName, and BirthDate are not getting populated with the data.
What is the reason that the fields fail to display the fetched data?
- A. The Typeghead ley is not in the correct format
- B. FirstName, LastName, and BirthDate are not placed inside the Type ahead Block.
- C. Lookup Mode is not selected in the properties of the Type A Head Block.
- D. Use Data JSON is not selected in the properties of the Type Ahead Block.
Answer: B
NEW QUESTION 38
Refer to the exhibit.
A developer has configured an integration Procedure element with SEND/RESPONSE TRANFORMATIONS as shown.
Alternatively, how could the developer configure Additional input to send exactly the same data? Assume that the developer checked Send Only Additional input.
A)
B)
C)
- A. Option C
- B. Option B
- C. Option A
Answer: A
NEW QUESTION 39
Users receive an APEC CPU limit Exceeded error when running an OmniScript in a Salesfoce Community. The OmniScript includes an Integration Procedure that contains two DataRaptors.
Which two Location should the developer check to troubleshoot the issue?
Choose 2 answers
- A. Script configuration
- B. Community logs
- C. Action Debugger
- D. DataRaptor configuration
Answer: C,D
NEW QUESTION 40
You want to edit a FlexCard.
Which question should you ask and answer before you make changes to the active version of the FlexCard?
- A. Will the FlexCard only be used for testing?
- B. Has the FlexCard been cloned before?
- C. Is the FlexCard used anywhere else?
- D. Where will the FlexCard be available to use?
Answer: C
NEW QUESTION 41
A developer needs to limit the of a DataRaptor Extract to a maximum of one result.
How should the developer configure this?
- A. Set the Limit Property on the Action that calls the DataRaptor Extract.
- B. Use the LIMIT filter on the Extract definition
- C. Use a Custom Output Type when creating the DataRaptor
- D. Define a formula with the Filter function
Answer: B
NEW QUESTION 42
......
Passing Key To Getting OmniStudio-Developer Certified Exam Engine PDF: https://www.dumpsvalid.com/OmniStudio-Developer-still-valid-exam.html
OmniStudio-Developer Exam Dumps Pass with Updated Tests Dumps: https://drive.google.com/open?id=18zldf106nVBr3fTOqNgkGREXaxjEAQCd