DumpsValid 301a Dumps Real Exam Questions Test Engine Dumps Training
F5 301a exam dumps and online Test Engine
For more info read reference:
F5-301a Official Certification Site
NEW QUESTION 36
A virtual server configuration for traffic destined to a server is as shown:
FTP traffic is destined to the 192.168.1.101 server from the source of 192.168.2.129.
Based on precedence, which virtual server accepts this traffic?
- A. MyVS1
- B. MyVS4
- C. MyV53
- D. MyVS2
Answer: D
NEW QUESTION 37
An LTM Specialist configures a new virtual server with a single pool member. The LTM Specialist has NOT defined a health monitor for the pool, pool member or node.
What is the status of the virtual server?
- A. Available (Enabled)
- B. Offline (Disabled)
- C. Unavailable (Enabled)
- D. Unknown (Enabled)
Answer: D
NEW QUESTION 38
What should an LTM Specialist configure on an LTM device to send AVR notification emails?
- A. Email notification to be sent via iControl from the LTM device
- B. Syslog on the LTM device to send to an SMTP server
- C. Email notification to be sent via SMTP from the LTM device
- D. Custom SNMP traps on the LTM device for AVR notifications
Answer: C
NEW QUESTION 39
Exhibit.
The LTM devices LTM1 and LTM2 are configured in a Device Group (Sync Failover) with Network Failover configured on both the management and HA and Internal VLANS. and ConfigSync is confined in a Device Group (Sync Failover) with Network Failover and internal are tagged on a single trunk with subnets Connection Mirroring is configured on both the HA interlace directly connected between LTM1 and LTM2, and the management interlace is connected to a management switch. The LTM devices have four Traffic Groups defined, and both LTM devices are healthy and capable of passing traffic for any of the Traffic Groups.
An LTM Specialist disconnects the cable for the HA network in an effort to test failover.
Which HA functionality works in this case?
- A. ConfigSync does NOT work; Connection Mirroring works
- B. ConfigSync works. Connection Mirroring docs NOT work
- C. ConfigSync works Connection Mirroring works
- D. ConfigSync does NOT work. Connection Mirroring floes NOT work.
Answer: A
NEW QUESTION 40
An LTM Specialist needs to create two virtual servers.
The application has links for both HTTP and HTTPS version of application. The client must be persistence to a pool member, no matter which virtual server is accessed.
What must be selected in the Source Address Affinity persistence profile?
- A. Match across Services
- B. Match across Polls
- C. Match across Pool Members
- D. Match across Virtual Servers
Answer: D
NEW QUESTION 41
An LTM Specialist needs to create an iRule that creates persistence records based on a JSESSIONID cookie. If a persistence record already exists, then the iRule must persist the client connection according to the existing record.
Which persistence profile enables the iRule to meet these requirements?
- A. Universal
- B. SSL
- C. Destination Address Affinity
- D. Cookie
- E. Source Address Affinity
Answer: A
NEW QUESTION 42
An LTM Specialist needs to add a pool that will load balance MYSOL services. It has four members, each with differing hardware platforms. All pool members are already assigned to another pool for load balancing FTP traffic.
Which load balancing method is most effective when the LTM Specialist sets up the pool?
- A. Least Connections (node)
- B. Predictive member)
- C. Observed (node)
- D. Round Robin
Answer: C
NEW QUESTION 43
A pool with a default connection limit is configured to use Round Robin as the load balancing method. An LTM Specialist needs to ensure that the LTM device selects a server with the fewest number of connections when new clients connect. Another pool is using the same set of backend servers.
Which load balancing-method should the pool be changed to?
- A. Weighted Least Connections (member)
- B. Least Connections
- C. Least Connections
- D. Weighted Least Connections (node]
Answer: C
NEW QUESTION 44
An unwanted IP address tries to connect to the configuration utility via Self IP An LTM Specialist needs to block the attempts based on the IP address.
How should the ITM Specialist block the attempts without affecting other users?
- A. Device trust
- B. Port lockdown
- C. Packet filter
- D. SSH IP allow list
Answer: C
NEW QUESTION 45
TWO LTM devices are in the same Device Group and configured for Ac live/Standby Failover. The LTM Specialist observes that the HA Active and Standby device constantly changes state. All network links use the default route domain A dedicated fiber ink is used for the HA connection with a latency of 250 ms but no packet loss.
What is causing the change in failover state to occur?
- A. The HA network is using multicast IP.
- B. The HA network is not configured for mirroring.
- C. The HA network latency is too high.
- D. The HA network is using the default routing domain.
Answer: A
Explanation:
NEW QUESTION 46
A VCMP guest has the following characteristics:
* Resources allocated for CPU memory, network interfaces, and disk space
* Virtual disk created
* The guest is NOT running
The guest is NOT running in which state is the VCMP guest
- A. Deployed
- B. Offline
- C. Provisioned
- D. Configured
Answer: C
NEW QUESTION 47
An LTM device configuration is as shown:
An LTM device configuration is as shown
What should be the two expected outcomes based on this configuration? (Choose two.)
- A. A client session that has been idle for 14 minutes will be balanced to a new pool member
- B. A client session that has been idle for 20 minutes will be balanced to a new pool member
- C. A client session that has been idle for 16 minutes will be sent to the same pool member
- D. A client session that has been idle for 12 minutes will be sent to the same pool member
- E. A client session that has been idle for 48 minutes will be sent to the same pool members
Answer: B,D
NEW QUESTION 48
An LTM device receives a response string containing "error"
Which monitor type and parameter will mark the HTTP server as down?
- A. HTTP monitor and Receive String "error'' ... flag is up
- B. HTTP monitor. Receive String "down", and set the Reverse option to Yes .... flag is
- C. HTTP monitor, Receive String "error", and set the Reverse option to Yes
- D. HTTP monitor and Receive Disable String "error'' .... flag is disable
Answer: C
NEW QUESTION 49
A new DNS virtual server has been configured. Testing reveals that DNS server has failed to accept DNS over TCP. The configuration of the virtual server is as follows:
Which action should be taken to correct this issue?
- A. add a TCP prone to the existing virtual server.
- B. change the profile set on the virtual server To TCP/UDP
- C. change the profile set on the virtual server to TCP
- D. create a new virtual server with the service port of 53 and the protocol set to TC
Answer: D
NEW QUESTION 50
The web application team requests help from the LTM Specialist to Improve the performance of their web sites that are load balanced by the F5 LTM device with a Standard Virtual Server.
Which virtual server type will improve the performance of the web application servers?
- A. Performance (HTTP)
- B. Performance (Layer 4)
- C. Stateless
- D. Forwarding (IP)
Answer: A
NEW QUESTION 51
An LTM device configured with a management IP address and route and a series of self-IPs and TMM routes. Both management and TMM have a routing entry for 101 10/24 Application traffic is being load balanced and sent to pool member 10.1.1.123 with SNAT Automap and configured.
Which route will the LTM device use?
- A. management route regardless of the management port status
- B. equal cost multipath load balancing via both routes
- C. TMM route regardless of the management port status
- D. both routes, which will duplicate traffic on both management and TMM interface
- E. management route when TMM interface is down or TMM is offline
Answer: C
NEW QUESTION 52
Where does a LTM Specialist view all of the objects that are part of a deployed iApp?
- A. iAPP> Application Policy > Objects
- B. Local Traffic > Network Map > View Map
- C. Local Traffic . Virtual Servers > Applications
- D. IAP > Application Service > Components
Answer: D
NEW QUESTION 53
In an iApp, which configuration protects against accidental changes to an application Services configuration?
- A. Strict Updates
- B. Components
- C. Template
- D. Name
Answer: A
NEW QUESTION 54
An ITM Specialist has the configuration shown:
The LTM Specialist needs to create a new virtual server in part B.
Which virtual address(es) should be used for the new virtual server?
- A. 10.90.0.1 and 10.100.0.1
- B. 10.120.0.1 only
- C. 10.90.0.1 and 10.12.0.1
- D. 10.100.0.1 and.10.120.0.1
Answer: D
NEW QUESTION 55
Refer to the exhibit.
The http monitor is applied to a pool. All members are enabled. One server responds as follows.
What is the resulting status of this poo! member?
- A. Unavailable (Disabled)
- B. Available (Enabled)
- C. Offline (Disabled)
- D. Offline (Enabled)
Answer: D
Explanation:
The first picture "Send String" and "Receive String" are not clear. Send String should be "GOOD", the response packet does not contain this keyword. Receive Disable String is completely unclear. If the response packet contains the content of Receive Disable String at this time, it will be Available (Disabled), If the content of Receive Disable String is not included, then Offline (Enabled).
NEW QUESTION 56
......
F5 301a: Selling LTM Specialist Products and Solutions: https://www.dumpsvalid.com/301a-still-valid-exam.html
Reliable 301a Exam Tips Test Pdf Exam Material: https://drive.google.com/open?id=133wCXiK6ub1QPG3Q1THjNKRNfFOvH17w