Check Real CWNP CWDP-304 Exam Question for Free (2024)
Get Ready to Boost your Prepare for your CWDP-304 Exam with 233 Questions
NEW QUESTION # 51
While performing a validation site survey, you realize that overlapping channels are being used on the 2.4 GHz bad due to the automatic channel assignment algorithm of the WLAN infrastructure.
What should you do to prevent this?
- A. Reconfigure the automatic channel assignment settings to use only channels 1, 6, and 11
- B. Leave it as it is; sometimes using all 11 channels in 2.4 GHz gives the optimum performance result
- C. Reconfigure the network to use static channel plans because automatic channel assignment algorithms are all broken
- D. Purchase and deploy new APs from a different vendor
Answer: A
NEW QUESTION # 52
Using a SCA means that all APs will be using the same channel in a given layer. How is the AP with which the client associates determined?
Response:
- A. All APs share a virtual BSSID. A controller will tell the closest AP to the client to communicate with it, since it has a greater RSSI from the client.
- B. All APs share a virtual Multicast Address. A controller will tell the closest AP to the client to communicate with it, since it has a greater RSSI from the client.
- C. All APs share a virtual IP address. A controller will tell the closest AP to the client to communicate with it, since it has a greater RSSI from the client.
- D. The client selects the AP based on a known set of MAC to BSSID mappings stored in the clients authorized SSID listing.
Answer: D
NEW QUESTION # 53
What advantages are provided by per-user PSKs when compared with ESS-wide PSKs?(Choose all that apply.) Response:
- A. Per-user PSKs are easier to manage if a PSK is compromised or an employee leaves a company.
- B. Per-user PSKs are more secure than ESS-wide PSKs because they support mutual authentication.
- C. Per-user PSKs are standardized and certified by the Wi-Fi Alliance.
- D. Per-user PSKs allow easier user-based access control with WPA/WPA2-Personal security.
Answer: A
NEW QUESTION # 54
What important item is often left out of operational and maintenance plans?
Response:
- A. Network overview
- B. Engineering feedback
- C. Configuration backups
- D. Syslog analysis
Answer: B
NEW QUESTION # 55
What is the best method of gathering attenuation measurements from any building materials or objects?
- A. After measuring the RSSI in free space 5 meters (16.5 feet) apart, put an AP 4 meters (13 feet) away from the wall or object on one side and your measuring device 0.67 meters (2 feet) away from the wall or object on the other side. Take measurement and compare the difference.
- B. Use the pre-built attenuation values in the predictive design tool.
- C. Look on the Internet for attenuation values for each one of the materials that might attenuate the Wi-Fi signal using the material provider's websites.
- D. After measuring the RSSI in free space 1 meter (3 feet) apart, put an AP 0.32 meters (1 feet) away from the wall or object on the other side.
Take measurements and compare the difference.
Answer: A
NEW QUESTION # 56
After deploying a 5 GHz-only WLAN infrastructure in the USA, using 20 MHz channel-widths and all 25 available channels, one of the managers of the company brings his 802.11n tablet to the office to test the Guest SSID. While testing, there were several spots where we would get poor RSSI (below -80dBM) or none at all. You checked the WLAN infrastructure and all APs are up and running and you've validated coverage after deployment. What is causing this issue?
- A. His tablet doesn't support the 5 GHz band
- B. His tablet only supports a 40 MHz channel-width
- C. His tablet does not support one or more of the 5 GHz channels
- D. His tablet doesn't support MU-MIMO
Answer: D
NEW QUESTION # 57
You told your customer that multipath fading may be mitigated simply by moving one or both of the receivers antennas a small amount, usually by one to four wavelengths away from its original position. Your customer is prepared to make the change, but does not know the wavelength for
802.11ac.
What is the approximate wavelength of an 802.11ac radio wave?
- A. 15.24 cm (6 inches)
- B. 45 cm (17.71 inches)
- C. 12 cm (4.72 inches)
- D. 5.5 cm (2.16 inches)
Answer: D
NEW QUESTION # 58
What is the DSCP Per Hop Behavior equivalent classification of the 802.11 AC_VO priority level?
- A. AF31
- B. EF
- C. CS3
- D. VO
Answer: B
NEW QUESTION # 59
When deploying a new WLAN infrastructure using PoE to power the APs, you realize that a known good AP is not powering up. You use the same cable to connect your laptop and connect without any trouble. What is the most likely reason the AP did not power up?
- A. Spanning-tree convergence
- B. Lack of PoE budget on the switch
- C. Layer 3 routing
- D. Missing AP licenses in the controller
Answer: B
NEW QUESTION # 60
You are tasked with designing the WLAN to accommodate certain high density areas on your university campus where users frequently come and go. With a limited DHCP pool size (subnet mask = 255.255.252.0) for this WLAN subnet, you want to ensure that your DHCP addresses are used efficiently and are not exhausted, which would prevent new client Layer 3 connections. The DHCP server is a Windows Server 2012 R2 machine.
Your design task is to determine the best configuration to allow as many users as possible while avoiding WLAN service interruptions and also to use the available addresses as efficiently as possible.
What setting would be most effective at achieving this design task?
- A. Set the inactive wireless client timeout (client age-out) to 5 minutes
- B. Set the RTS threshold to 2346 bytes
- C. Set the maximum client limit per radio to 64
- D. Set the DHCP lease for this pool to 20 minutes
Answer: D
NEW QUESTION # 61
Your new customer is concerned about maintaining privacy for their proprietary information when you conduct information gathering for their WLAN design. Which document can you use to directly address their concern?
- A. NDA
- B. SoW
- C. BoM
- D. Hold Harmless
Answer: A
NEW QUESTION # 62
You are creating an outdoor bridge link that spans more than 1000 yards. Which one of the following antenna types is more likely to be included in the design?
- A. Yagi
- B. Panel
- C. Omni
- D. Patch
Answer: A
NEW QUESTION # 63
What metric implements the simplest algorithm and lowest accuracy in networks requiring locations?
- A. Angle of Arrival (AoA)
- B. Time of Arrival (ToA)
- C. Received Signal Strength Indicator (RSSI)
- D. Time Difference of Arrival (TDoA)
Answer: C
NEW QUESTION # 64
An MSA commonly addresses at least which two legal categories?
Response:
- A. Intellectual property protection
- B. Indemnity clause
- C. Nondisclosure agreement
- D. Hold harmless
Answer: C
NEW QUESTION # 65
What is the most suitable antenna option to be used when designing a WLAN infrastructure with APs mounted on a ceiling with a height of more than 20 feet and having all of the client stations used from the floor?
- A. Dish
- B. Patch
- C. Grid
- D. Low-gain dipole
Answer: B
NEW QUESTION # 66
Which of the following items could be considered constraints when performing a network design?(Choose all that apply.) Response:
- A. Timeline
- B. Personnel
- C. Politics
- D. Budget
Answer: A,B,C,D
NEW QUESTION # 67
During lunch time in the break room of a company, Wi-Fi connectivity on the 2.4 GHz band is intermittent.
Every other time of the day, it works fine. What's the likely cause of this issue?
Response:
- A. Microwaves in the cafeteria are interfering with the Wi-Fi on the 2.4 GHz band
- B. Employees are using their cell data instead of using the Wi-Fi
- C. Toasters and ovens are heating up the air, raising the noise floor with the Wi-Fi on the 2.4 Ghz band
- D. The AP in the cafeteria keeps rebooting due to lack of PoE budget on the switch
Answer: A
NEW QUESTION # 68
What functions may be performed by a WIPS?(Choose all that apply.)
- A. Distributed protocol analysis
- B. Automated threat mitigation
- C. Data forensics and analysis
- D. Performance monitoring and response
- E. Client access to the distribution system
Answer: A,B,C,D
NEW QUESTION # 69
......
Use Free CWDP-304 Exam Questions that Stimulates Actual EXAM : https://www.dumpsvalid.com/CWDP-304-still-valid-exam.html
Get 100% Real CWDP-304 Free Online Practice Test: https://drive.google.com/open?id=1o4tm9t1MJvtEhNhr6Ua3Jepz2MPmO6nk