[2021] Pass Nutanix NCP-MCI-5.15 Premium Files Test Engine pdf - Free Dumps Collection
New 2021 Realistic NCP-MCI-5.15 Dumps Test Engine Exam Questions in here
NEW QUESTION 81
An administrator wants to have a VM on an AHV cluster with access to multiple VLANs. What is the most efficient way to achieve this?
- A. Update a vNIC on the VM to operate in trunked mode for all desired VLANs.
- B. Use SFPs that allow the needed VLANs.
- C. Use one vNIC per VLAN for the VM.
- D. Create a network in AHV associated with all those VLANs on all hosts.
Answer: A
NEW QUESTION 82
An administrator has been alerted to a VM that has high I/O latency and wants to determine if there are any other factors, such as insufficient network or memory resources that correlate, as part of a troubleshooting process.
Which type of chart should the administrator create to allow all relevant data to be easily exported to CSV for later analysis?
- A. A VM metric chart for each of the relevant metrics
- B. A cluster entity chart with each of the relevant metrics
- C. A VM entity chart with each of the relevant metrics.
- D. A cluster metric chart for each of the relevant metrics
Answer: B
NEW QUESTION 83
In the event of failed CVM, what happens to the physically attached storage for the node and the VMs running on it?
- A. The drives for that node are inaccessible. The VMs continue to run.
- B. The drives for that node are inaccessible. The VMs reboot.
- C. The hypervisor regains control of the drives. VMs on that node reboot.
- D. The hypervisor regain control of the drives. VMs on that node continue to run.
Answer: C
NEW QUESTION 84
An administrator is adding a node with a higher AOS release to an existing cluster.
What is the most efficient action an administrator should take to ensure it is in a supported state?
- A. Destroy cluster and foundation with the new node in place
- B. Perform standalone reimage of the new node and then add to cluster
- C. Add the node to the cluster and reboot all running VMs to use new release
- D. Add the node to the cluster and leave the existing AOS version in place
Answer: B
NEW QUESTION 85
A VM in a 12-node Nutanix cluster is hosting an application that has specific Physical GPU requirements. Only three nodes in the cluster meet this requirement.
The administrator wants to allow a general workload to be distributed across all nodes in the cluster and must make sure that the node hosting the VM meets its requirements.
How should the administrator perform this task?
- A. Create a sperate three-node cluster using the nodes that meet the requirement.
- B. Configure anti-affinity rules between the application VM and the other VMs running on the cluster.
- C. Over-Provision the application VM with additional virtual GPUs.
- D. Configure VM-Host affinity for the nodes that meet the application's GPU requirement.
Answer: A
NEW QUESTION 86
When VM HA Reservation is enabled, what is the expected behavior for all failed VMs in the event of a host failure?
- A. Perform a live migration to other hosts in the AHV cluster
- B. Restart on other hosts in the AHV cluster
- C. Restart on a best-effort basis if resources are available
- D. Perform a live migration on a best-effort basis if resources are available
Answer: B
Explanation:
Reference:
http://www.nutanixpedia.com/p/configuring-ha.html
NEW QUESTION 87
An administrator is configuring cross-hypervisor DR from an ESXi cluster to a new AHV cluster. When the administrator migrates a protection domain to the AHV cluster, the VMs fail to boot.
What should the administrator do to correct this problem?
- A. Uninstall VMware Tools from the VMs.
- B. Increase the snapshot frequency to more than 6 hours.
- C. Add all VMs into a single consistency group.
- D. Install Nutanix Guest Tools in the protected VMs.
Answer: D
NEW QUESTION 88
An administrator wants to use Volumes to connect to physical servers that are not able to be virtualized.
Which three things must be configured for Volumes to support iSCSI clients? (Choose three)
- A. Client OS iSCSI initiator
- B. iSCSI Multipathing I/O
- C. Enable external client access
- D. Data Services IP address
- E. Cluster Virtual IP address
Answer: A,D,E
Explanation:
https://portal.nutanix.com/page/documents/details/?targetId=Web-Console-Guide-Prism-v51:wc-block-services-c.html
NEW QUESTION 89
Which configuration should an administrator make in Prism to receive a summary of the alerts every 24 hours?
- A. Email Digest
- B. SNMP
- C. Individual Alerts
- D. Syslog
Answer: A
Explanation:
https://portal.nutanix.com/page/documents/details/?targetId=Prism_Central_Guide-Acr_v4_6:mul_alerts_management_pc_c.html Prism Central allows you to configure the alert messages sent by Prism Central. To configure alert settings, reporting rules, and message templates, do the following:
Note: Alert emails sent by Prism Central are in addition to any alert emails you might have configured on individual clusters through the Prism web console. You will receive email from both entities in this case. Prism Central alert emailing is not enabled by default; you must explicitly enable it and specify the recipients (Nutanix customer support and/or supplied email addresses).
* Do one of the following:
* In the gear icon pull-down list of the main menu, select Alert Email Configuration.
* In the Alerts dashboard, click the Email Configuration button.
The Alert Email Configuration window appears.
* Click the Settings tab and do the following:
* Enable Prism Central to sent alert emails.
* Check the Email Every Alert box to send an email whenever the event occurs.
* Check the Email Daily Digest box to send a cumulative (24 hour) list of alerts once a day.
You can check one or both boxes. If neither box is checked, no alert emails are sent by Prism Central.
* Check the Nutanix Support box to send alert notification to Nutanix customer support.
* To send alert notifications to others, enter their email addresses in a comma separate list in the field below the Nutanix Support box.
* Click the Apply button to apply the changes and continue the configuration (or click the Save button to apply the changes and close the window).
The Connection Status section displays mail transport status information. In this example, an SMTP server is configured for mail service. Clicking the Details link opens the SMTP server settings window
NEW QUESTION 90
Which three cluster operations require an administrator to reclaim licenses?(Choose three)
- A. Remove a Node from a cluster
- B. Destroy a cluster.
- C. Migrate a cluster
- D. Upgrade a cluster
- E. Move Nodes between clusters.
Answer: A,B,E
Explanation:
https://portal.nutanix.com/page/documents/details/?targetId=Web_Console_Guide-Prism_v4_7:lic_licensing_managing_c.html Reclaiming Licenses (Including License Renewal) You can reclaim and optionally re-apply licenses for nodes in your clusters:
* You must reclaim licenses when you plan to destroy a cluster. First reclaim the licenses, then destroy the cluster. You do not need to reclaim Starter licenses. These licenses are automatically applied whenever you create a cluster, including after you have destroyed a cluster.
* Return licenses to your inventory when you remove one or more nodes from a cluster. Also, if you move nodes from one cluster to another, first reclaim the licenses, move the nodes, then re-apply the licenses.
* You can reclaim licenses for nodes in your clusters in cases where you want to make modifications or downgrade licenses. For example, applying an Ultimate license to all nodes in a cluster where some nodes are currently licensed as Pro and some nodes are licensed as Ultimate. You might also want to transition nodes from Ultimate to Pro licensing.
* You must reclaim licenses when you renew licenses. First reclaim the expired licenses, then apply new licenses.
NEW QUESTION 91
Which configuration item is required to set-up email alerts?
- A. SMTP
- B. SNMP
- C. NTP
- D. Pulse
Answer: A
NEW QUESTION 92
Refer to the exhibit.
System Non-Root Partition Usage shows a warning or critical alert The administrator needs to change the frequency of checks and alerts to respond more quickly.
Where in Prism Element should the administrator change the frequency of checks and alerts?
- A. Alerts Dashboard > Manage Checks > Frequency
- B. Alerts Dashboard > Manage Checks > Schedule
- C. Health Dashboard > Manage Crocks > Frequency
- D. Health Dashboard > Manage Checks > Schedule
Answer: D
NEW QUESTION 93
Which two image types are stored by the Nutanix Image Service? (Choose two)
- A. QCOW2
- B. VHDX
- C. ISO
- D. VMDK
- E. Disk
Answer: C,E
NEW QUESTION 94
An administrator needs to power down an AHV node in order to replace a failed DIMM?
Which step should the administrator take after placing the node into maintenance mode?
- A. Shut Down the nutanix CVM
- B. Execute the command cluster status
- C. Power of the node
- D. Reboot the Nutanix CVM
Answer: A
NEW QUESTION 95
Which 3 VM components can be monitored in the VM dashboard in prism element (choose three)
- A. I/O latency
- B. CPU utilization
- C. Memory Utilization
- D. Network Utilization
- E. Flash mode Capability
Answer: A,B,C
NEW QUESTION 96
An administrator installs Nutanix-specific PowerShell cmdlets. The cmdlets fail to run.
Which two requirements should the administrator verify first? (Choose two)
- A. The cmdlets have the proper permissions
- B. .Net Framework 4.0 is installed
- C. PowerShell 2.0 or later is installed
- D. Windows 2016 r2 or later is installed
- E. Python 2.7 or greater is installed
Answer: B,C
NEW QUESTION 97
In which two scenarios is Nutanix Key Management Server supported?
- A. Data-at-Rest Encryption
- B. Cluster's local KMS.
- C. XenServer and AHV mixed cluster
- D. KVM and AHV mixed cluster
Answer: C,D
NEW QUESTION 98
Which three settings are required for network switch discovery in Prism? (Choose Three)
- A. SMTP Server IP address
- B. AHV Host IP address
- C. Switch Management IP Address
- D. Cluster CVM IP address
- E. SNMP Community Name
Answer: B,C,E
NEW QUESTION 99
Which three upgrades should an administrator be able to perform using Lifecycle Management? (Choose Three)
- A. HBA Firmware
- B. BMC
- C. Hypervisor
- D. AOS
- E. BIOS
Answer: A,B,E
Explanation:
Reference:
https://portal.nutanix.com/page/documents/kbs/details?targetId=kA00e000000LMgICAW
NEW QUESTION 100
......
Nutanix NCP-MCI-5.15 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
| Topic 10 |
|
| Topic 11 |
|
| Topic 12 |
|
Updated Official licence for NCP-MCI-5.15 Certified by NCP-MCI-5.15 Dumps PDF: https://www.dumpsvalid.com/NCP-MCI-5.15-still-valid-exam.html