Best Quality C1000-196 Exam Questions IBM Test To Gain Brilliante Result!
Preparations of C1000-196 Exam 2026 Digital Business Automation Unlimited 117 Questions
NEW QUESTION # 54
Scenario: While securing a DataPower appliance in a multi-environment configuration, you must ensure that sensitive data is protected during transmission.
What two actions should you take to enhance the security of data in transit? (Choose two)
- A. Enable SSL/TLS encryption for all external-facing services
- B. Regularly review and update cryptographic algorithms to ensure they are up-to-date
- C. Use VPN tunnels to secure communication between internal and external systems
- D. Disable SSL and use plain text for all communications for better performance
Answer: A,C
NEW QUESTION # 55
Which of the following best describes the function of an Access Control List (ACL) in DataPower appliance security?
- A. It grants all users equal access to all resources on the appliance
- B. It automatically blocks all incoming network traffic from untrusted sources
- C. It ensures that only users with specific credentials can access the appliance web interface
- D. It allows only authenticated users to access specific appliance resources based on their IP address
Answer: D
NEW QUESTION # 56
What is the primary purpose of quiescing a DataPower appliance during maintenance?
- A. To suspend all active services and prevent configuration changes
- B. To enable firmware upgrades and ensure no conflicts with active services
- C. To stop all network traffic to the appliance
- D. To reboot the appliance without losing any configuration data
Answer: A
NEW QUESTION # 57
Which filter captures all packets to and from Server3, excluding those with a destination port of 4200?
- A. host Server3 and not src port 4200
- B. server Server3 and not dst port 4200
- C. host Server3 and not dst port 4200
- D. server Server3 and not src port 4200
Answer: C
NEW QUESTION # 58
What is the first step in setting up a new DataPower appliance for use in a production environment?
- A. Configure the network settings and ensure the appliance has access to the required network
- B. Run a system diagnostic to check for hardware issues
- C. Perform a secure backup to ensure configurations are preserved
- D. Install the latest firmware update to ensure the appliance is running the latest version
Answer: A
NEW QUESTION # 59
Scenario: You have configured a DataPower appliance with multiple network interfaces, but one interface is not showing as "up" in the status.
What are the first two steps you should take to resolve this? (Choose two)
- A. Disable and re-enable the network interface in the web GUI
- B. Verify that the network cable is properly connected to the interface
- C. Ensure that the interface is properly configured with an IP address and subnet mask
- D. Reset the appliance to reinitialize all network interfaces
Answer: B,C
NEW QUESTION # 60
When inspecting the logs of a DataPower appliance, what type of information would you expect to find in the error logs?
- A. Transaction data related to the flow of messages across the system
- B. Details of all incoming requests processed by the appliance
- C. Errors related to system resources, hardware, or software failures
- D. Detailed user actions within the appliance's web interface
Answer: C
NEW QUESTION # 61
What is the correct procedure for performing a firmware upgrade on a DataPower appliance?
- A. Reboot the appliance immediately after the firmware upgrade is initiated
- B. Disconnect all network interfaces before starting the firmware upgrade
- C. Perform a full system backup, then initiate the upgrade from the web GUI
- D. Only perform the upgrade during off-peak hours without any preparation
Answer: C
NEW QUESTION # 62
Scenario: While configuring DataPower to enhance security, you are tasked with setting up user access controls.
What should be your first two actions to ensure that access to the appliance is secure? (Choose two)
- A. Allow users to log in without passwords for easier access
- B. Set up detailed access logs to track all user activities
- C. Create specific roles and assign them based on users' responsibilities
- D. Disable all user accounts that have not been assigned roles
Answer: B,C
NEW QUESTION # 63
When configuring a DataPower appliance for high availability, what type of IP address should be assigned to both appliances in the high-availability pair?
- A. A dynamic IP address
- B. A static IP address on each appliance
- C. A floating IP address
- D. A shared virtual IP address
Answer: D
NEW QUESTION # 64
Scenario: You are tasked with configuring high availability for DataPower appliances in a critical production environment.
What steps should you take to ensure the appliances function properly in an HA pair? (Choose two)
- A. Set up a failover mechanism that allows the secondary appliance to take over in case of failure
- B. Assign the same static IP to both appliances for ease of management
- C. Configure the appliances to share the same virtual IP address
- D. Ensure both appliances have identical network configurations, including IP addresses
Answer: A,C
NEW QUESTION # 65
Which of the following steps should be performed to configure a network interface on a DataPower appliance?
- A. Assign a default gateway and configure DNS settings
- B. Select the interface type and assign the appropriate IP address
- C. Choose the type of traffic (HTTP/HTTPS) to be handled by the interface
- D. Configure only the IP address and leave other settings as default
Answer: B
NEW QUESTION # 66
When setting up a new DataPower appliance, which of the following actions should be taken to secure the appliance after the initial configuration?
- A. Enable password policies and configure Role-Based Management (RBM) settings
- B. Disable external access to the appliance until security policies are set
- C. Set up internal DNS resolution for easy appliance management
- D. Configure the external IP address and connect to the internet
Answer: A
NEW QUESTION # 67
Which of the following is the correct approach to configure a static IP address for a DataPower appliance?
- A. Set the IP address and subnet mask in the appliance's web GUI under network settings
- B. Assign the IP address through a DHCP server
- C. Use the CLI to configure the IP address and DNS settings
- D. Configure the static IP address only for internal interfaces and leave external interfaces dynamic
Answer: A
NEW QUESTION # 68
A DataPower appliance has the following static routes defined:
1. static route: 10.0.5.0/24 via 10.0.0.1
2. static route: 10.1.1.12/32 via 10.0.0.1
3. static route: 10.1.15.0/28 via 10.0.0.1
4. static route: 10.1.16.0/30 via 10.0.0.1
DataPower evaluate:
a) 10.0.5.0/24 via 10.0.0.1
b) 10.1.1.12/32 via 10.0.0.1
c) 10.1.15.0/28 via 10.0.0.1
d) 10.1.16.0/30 via 10.0.0.1
At runtime, in what order will DataPower evaluate the routes?
- A. 1=b,2=d,3=c,4=a
- B. 1=d,2=b,3=c,4=a
- C. 1=a,2=b,3=c,4=d
- D. 1=b,2=d,3=a,4=c
Answer: A
NEW QUESTION # 69
Which of the following actions is recommended when you receive an alert indicating that a DataPower appliance is experiencing high network traffic?
- A. Inspect the appliance's network interfaces and verify the traffic patterns
- B. Increase the appliance's network throughput to handle more traffic
- C. Immediately restart the appliance to resolve the issue
- D. Disconnect external networks to prevent overload
Answer: A
NEW QUESTION # 70
Scenario: You are tasked with setting up a new DataPower appliance for your company's internal network. After performing the initial configuration, you need to ensure that the appliance's configurations can be securely backed up and restored.
What steps should you take to ensure that backup and restoration can be done efficiently? (Choose two)
- A. Disable network access during backup to avoid conflicts
- B. Perform a manual backup of the appliance's configuration and store it on a local server
- C. Enable automated backups to an external server for regular backups
- D. Verify the backup configurations are encrypted for secure storage
Answer: C,D
NEW QUESTION # 71
In the context of DataPower appliances, what is typically the role of the x2 form factor series?
- A. Designed for high availability and clustering to handle large-scale deployments
- B. Dedicated to low-traffic environments with no need for external storage
- C. Optimized for heavy computational tasks and physical device management
- D. Primarily used for physical testing environments with limited network configurations
Answer: A
NEW QUESTION # 72
To protect sensitive information on the DataPower appliance, which of the following actions should be implemented to manage cryptographic material securely?
- A. Use hard-coded encryption keys in appliance configurations
- B. Store cryptographic material in an HSM (Hardware Security Module)
- C. Configure weak encryption methods to speed up processing
- D. Disable encryption and rely on network security
Answer: B
NEW QUESTION # 73
When performing the initial configuration of a DataPower appliance, which of the following must be configured first to allow the appliance to communicate with external systems?
- A. Security policies for remote access
- B. DNS settings for hostname resolution
- C. Network interface settings and IP configuration
- D. Administrator roles and permissions
Answer: C
NEW QUESTION # 74
Which of the following DataPower appliance form factors supports intrusion detection for physical devices?
- A. IBM DataPower x2 Series
- B. IBM DataPower 10x
- C. IBM DataPower Gateway 8xx5
- D. IBM DataPower 8x8
Answer: A
NEW QUESTION # 75
Which of the following methods can be used to secure user authentication when accessing the DataPower appliance?
- A. Allow any IP address to access the appliance
- B. Set weak password policies to simplify user access
- C. Enable anonymous authentication for all users
- D. Use LDAP or Active Directory for centralized authentication
Answer: D
NEW QUESTION # 76
......
Focus on C1000-196 All-in-One Exam Guide For Quick Preparation: https://www.dumpsvalid.com/C1000-196-still-valid-exam.html
C1000-196 All-in-One Exam Guide For Quick Preparation: https://drive.google.com/open?id=1xszP1dFEleWiiEH_upK5eNpV23QILpMa